Connecting E-PoC & P1 PoC systems to existing radio systems
This all-in-one and easy-to-install, low-cost gateway enables you to significantly extend the range of, or migrate from, existing radio systems.
Everything you need to know
- Extend the range and capabilities of almost any radio system (including Capacity Plus / Max, Tetra, P25 etc.)
- Existing radio systems will benefit from E-PoC’s extensive range of software and devices:
- DN400 Series 4G LTE PoC Radio
- E-PoC Smartphone Application – iOS / Android
- E-PoC / P1 PC Dispatcher
- E-PoC / P1 Android Dispatcher
- E-PoC / P1 Recorder
- Enables easy and low cost migration from existing radio systems to POC.
- Scalable to meet the demands of more complex systems.
Installation in just three easy steps
- Power up
- Connect to the internet via ethernet or Wi-Fi
- Programme Gateway 3.0 over-the-air (OTA) via Entel’s secure web portal
In less than 5 minutes, networks are integrated and ready to use.
Multiple network support Entel’s E-PoC / P1 Gateway supports virtually any network type (including Capacity Plus / Max, Tetra, P25 etc.)
Enhance existing radio systems & capabilities Existing radio systems can benefit from the virtually unlimited range delivered by Entel’s E-PoC fully hosted & P1 Private networks. In addition these systems can also benefit from integration with E-PoC & P1 dispatchers, E-PoC Smartphones, and E-PoC & P1 PC recorder software etc.
Over-the-internet (OTI) programmable Like the DN400 series radios, Entel’s Gateway 3.0 is also remotely programmable meaning your Entel dealer can re-program or update your gateway instantly and without having to visit site saving both time and expense.
Scalable A single Gateway can link one call between the two systems. Should multiple simultaneous calls be required, subject to the number of PMR radio system channels, multiple Gateways can be used. The Gateways can also be used to link more than two radio systems together.
Easy to install Installation is as simple as attaching the Gateway antennas, LAN cable (or connecting to your WiFi network) and switching on, your Dealer does not even have to visit site (the universal version gateway requires the addition of a fixed mobile).
Low cost Entel’s Gateway with built-in Analogue / DMR Tier II radio costs about the same as a desktop PMR radio and offers so much more.
LCD display for operational status, information & diagnostics.
Compact and robust desktop design
Versatile can be used as bridge between different PMR radio networks
DMR / Analogue Radio (VHF & UHF versions): General
|Frequency Range||VHF: 136 – 174MHz
UHF: 400 – 470MHz
|Analogue Channel Spacing||25KHz / 12.5KHz|
|Digital Channel Spacing||12.5KHz|
|Antenna Impedance||50 ohm|
|Operating Temperature||-20° to +55°C|
|Approvals||Analogue mode RF EN 300 086 v2.1.2
Digital mode RF 300 113 v2.2.1
EMC EN 301 489-1 v2.2.0 &
EN301 489-5 v2.2.0
Safety (LVD) EN 60950:2006, A1, A11, A12 & A2
SAR EN 50566:2017, EN 62311:2008 &
|Air Interface (DMR)||ETSI TS 102 361|
DMR / Analogue Radio (VHF & UHF versions): Transmitter
|Power Output VHF (High / Mid / Low)||5W / 2W / 1 W|
|Power Output UHF (High / Mid / Low)||4W / 2W / 1W|
|Power Output PMR446 / DMR446||0.5W|
|Modulation Type||7K60FXE / 7K60FXD, 8K0F3E, 16K0F3E|
|Distortion||2% / 5% digital / analogue|
|Unwanted Emission||0.25uW / 1.0uW <1GHz / >1GHz|
|Adjacent Channel Power||-60dBc|
DMR / Analogue Radio (VHF & UHF versions): Receiver
|Digital Sensitivity||Typically -121dBm (0.2uV) for 5% BER|
|Analogue Sensitivity||Typically -121dBm (0.2uV) for 12dB Sinad|
|Rated Audio Output||2 watts|
|Adjacent Channel Selectivity||60dB (Digital) 60 / 70
(Analogue 12.5KHz / 25KHz)
|Spurious Response Rejection||-37dBm|
|Spurious Radiations||2.0nW / 20nW <1GHz / >1GHz|
E-PoC Interface: General
|Wired LAN||RTL GB LAN|
|Wireless LAN||802.11 b/g/n|
E-PoC Interface: Universal Version
|Audio Input||Vin max = 3Vrms
Vin typ = 0.7Vrms
Vin min = 0.1Vrms
Differential input into Gateway
|Audio Output||Vout max = 0.5Vrms (100%)
Vout typ 0.1Vrms (60%)
Differential ouput from Gateway
|PTT Digital Output||Active low during PTT
Open drain output without pull up in Gateway
|Valid Receive Digital Input||Active high during RX
Vhigh_min > 1.5V
Vhigh_max < 5.5V
|Operating Voltage||12VDC / 100 – 240VAC 50 / 60Hz|
|Overall Dimensions (HxWxD)||45mm x 275mm x 178mm|
|Weight (without external PSU & Antennas)||With Analogue / DMR radio: 1.8Kg
Universal Version (no radio): 1.58Kg