LMB-A1 Scanstrut self levelling backstay (aft) mount for Broadband Radar

Product details

The Scanstrut Self-Levelling Radar Mount range ensures your Simrad 3G/4G radar stays level with the horizon at all times for optimum antenna performance.

As the boat heels or rolls, the radar is kept horizontal, preventing target loss and giving the best possible radar picture.

This Backstay mounted version positions your radar away from any interference, leaving a clear deck free from obstruction.

Key Features

Hydraulic Damping
The main levelling unit features a fine turned damping system which reacts to major changes in heel angle of the boat. It is entirely maintenance free and no power is required

Bespoke Mounting Pole
2.6m (8’6”) aluminium mounting pole, supplied in 2 lengths with hidden joiner piece. Cables are routed down a cable channel for a neat install

High Strength Universal Base for Mounting Pole
Eliminates loading on backstay. base can be deck, transom or chainplate mounted

Suitable for any yacht
Stainless radome cradle has a fine tune adjustment for backstay angle and the product can be installed on both adjustable and split backstays (see FAQ for further information)

Nylon backstay bushing supplied
Clamps around backstay allowing cable tension to be adjusted

Mount your Radar higher
Additional 0.6m and 1.3m lengths available to mount your radome higher. Also available in Pole or Mast mounted versions.

Broadband Radar RI10 Interface Box

Product Details

A networking solution for Simrad systems with HDS multifunction displays and Broadband 3G or 4G Radars,the RI10 Radar Interface Box enables MARPA tracking when connected to a NMEA 2000 network with a high-speed heading sensor.

Radar Interface box for HALO Radar, RI-12

Product Details

Radar Interface box for HALO Radar, RI-12. All HALO models use Simrad’s new, universal RI-12 Radar Interface Box.

Key Features

• Designed to accomodate either 12 or 24 colt systems and used for all Halo models
• Rugged, screw-in power connector block (DC cable not supplied)
• Supplies 36V DC to the pedestal in Tx mode – Status LED is Green when on – Red when not
• Easy to connect NMEA2000 Micro C
• Ethernet 10_100BaseT output with Ethernet LED (pigtail adapter supplied for internal RJ45 to external Navico Yellow)
• Easy removable access cover with captive screws
• Silicon Rubber Cable glands

Scanstrut Radar Mast Mount

SC20 Mast mount kit for Broadband Radar.

FOR RADOMES & SATCOMS
Still the first choice for boat owners the world over, Scanstrut leads the way with a new generation of Mast Mounts.

The larger mounting feet are stronger, stiffer and now even easier to fit ensuring that the Scanstrut Mast Mount is the most secure on the market.

The SC20 is the most universal fixed Mast Mount in the range, offering compatibility for Simrad 3G/4G radomes.

Key Features

UNIVERSAL MOUNTING

Attaches to mast with four swivel feet, matching a variety of mast profiles.

STRONG FIXING

12 point fixing using high quality monel rivets.

COMPACT MOUNTING

Antenna extends only minimum distance from the front of the mast ensuring a compact installation.

SAFETY WIRE KIT

Independently attaches scanner to mast in case an accident damages the installation.

COMPATIBILITY*

Radome:

Lowrance, Simrad & B&G: 3G / 4G

Broadband 3G™ Radar

Broadband 3G™ radar is a simple and cost-effective way to enhance your situational awareness out on the water. This compact dome radar detects collision hazards and other targets from zero to 24 nautical miles away, and is designed to allow installation aboard even the smallest sportfishing vessels and dayboats.

Simrad HALO-3 Pulse Compression Radar

Product Details

See Near and Far, Simultaneously
Halo™ radar delivers an unprecedented mix of short and long range performance with its 4-foot open array, from just six metres (20 feet) to as far as 64 nautical miles. Monitor two distance ranges simultaneously in Dual Range mode, and take full advantage of Halo radar to keep an eye on faraway weather cells while monitoring channel markers and high speed watercraft up close. Pulse Compression technology means no compromises in detection at either range. Advanced digital signal processing helps to eliminate sea clutter, while Beam Sharpening technology provides enhanced separation between small or distant targets.

Safety, Weather, and Bird-Finder Radar
Halo radar delivers a comprehensive range of features to enhance your situational awareness and on-water safety. Monitor selected collision hazards with MARPA target tracking, or automatically highlight all approaching targets with the optional VelocityTrack™ Doppler motion-tracking upgrade. Keep watch on distant storm cells in Weather mode, your own real-time meteorological service. Halo radar also works as a powerful bird-finder, a must-have tool for sportfishing enthusiasts and pro anglers. Halo radar’s smart Weather and Bird modes require no manual tuning, just set the mode and go.

Ready in an Instant
Collision hazards won’t wait for your radar to start up – why should you? Halo radar’s solid-state technology is ready instantly from standby, and in just 16-25 seconds from a cold start. Avoid the 2-3 minute warm-up time associated with traditional pulse radar and trust Halo Radar to produce an immediate, accurate radar image when you need it. Halo radar’s low-power pulsed transmissions make it safe to run in anchorages and marinas, providing additional coverage in these high-collision-risk environments. Fast 48 RPM operation provides frequent position updates, while an advanced brushless motor and helical geartrain ensure quiet operation.

Key Features

• True 64nm range with 4-foot open array antenna
• Beam Sharpening for enhanced target separation
• Simultaneous Dual Range operation
• Dedicated Harbour, Offshore, Weather, and Bird modes
• High-speed 48 RPM operation for rapid updates
• Ready instantly from standby, and in 16-25 seconds from power-on
• MARPA target tracking (up to 10 targets, 20 in dual range)
• VelocityTrack™ Doppler technology for collision avoidance

R3016 Radar Control Unit

The R3016 is a dedicated control unit for Simrad radar systems and features an integrated 16-inch widescreen display. An ideal safety and navigation accessory for offshore cruisers and sportfishing vessels, the R3016 offers versatile flush or bracket-mount installation options and intuitive keypad-based operation for reliable control in all conditions.

Product Details

16-inch Widescreen Radar Control Unit
Make the most of your Simrad radar system by adding a dedicated screen and controls. Our professional-grade radar control units are easy to use, and designed to complement the design of our glass bridge displays and instruments. The R3016 features a high-definition, 16-inch widescreen display for a large and clear radar picture. Easily navigate crowded marinas and waterways, search for birds to find your next fishing spot, or keep a watchful eye on far-off weather cells. Choose from a clean flush-mount installation, or the convenience of bracket mounting to install almost anywhere.

Simple and Reliable Operation
Take control of your radar system with the integrated keypad and rotary dial. Direct-access menu keys beside the display operate the corresponding on-screen menu options, for quick and intuitive access to key settings and features. Large, reliable buttons are suitable for use in any conditions, including the sort of wet weather and rough seas that make your radar system even more crucial to a safe journey home. Anti-sea clutter technology helps to deliver clarity in those adverse conditions, giving you the best possible view.

Widely Compatible and Easy to Install
The R3016 is compatible with a wide range of Simrad radar solutions. Ethernet connectivity offers easy installation, and simple networking of multiple control units and radar systems. The R3016 also provides four NMEA 0183® ports and NMEA 2000® connectivity for compatible devices such as heading and speed sensors, AIS transceivers, and GPS receivers. Connect a Simrad marine monitor or other compatible display to the R3016’s HDMI output to create a secondary radar display, mirroring the built-in screen. Add a Simrad O2000 wired remote to make that second screen interactive, an ideal solution for dual-helm vessels.

Key Features

• 16-inch HD widescreen display
• HDMI output for an optional duplicate display
• Anti-sea-clutter technology for optimal clarity in adverse conditions
• MARPA target tracking
• Keypad and rotary-dial interface with 8 direct-access menu keys
• Bracket and flush-mount installation options

HD Digital Radar TXL-10S-4

Our HD Digital 10kW/64nm birdfinder radar features a high performance 4-foot open array scanner with compact pedestal design, ideal for smaller go-fast centre console sportfishing vessels and powerboats with limited top space. Experience unparalleled situational awareness, with exceptional detection of small or distant targets and minimised screen-clutter. With a proven history of oceangoing reliability, this commercial-grade radar will withstand a sustained wind load of up to 100 knots, and features a long-life magnetron and brushless motor for maximum service life.

Product Details

64nm Range With 64nm instrumented range and 1.8° beam resolution, the 10kW TXL-10S-4 is suitable for both offshore and inshore use.

Target Detection and RACON/SART Triggering When installed 15m (50’) above the waterline, the TXL-10S-4 scanner complies with tough IMO IEC62388 Annex D target detection specifications. In addition, it will trigger RACON navigational aids and SART locator beacons at a minimum of 5nm range, when installed just 5m (17’) high.

Dual EBL/VRM, Dual Guard Zones Rapidly determine the bearing and distance to any radar target with dual Electronic Bearing Lines (EBL) and Variable Range Markers (VRM). Dual Guard Zones alarm on targets both entering and existing the zone, with independently configurable range and sensitivity.

Key Features

• 4-foot open-array antenna with slim pedestal design
• 64nm instrumented range with 1.8 beam resolution
• Meets IMO IEC62388 Annex D target detection specifications (triggers RACONs and SARTs at 5nm range)
• Automatic Tune, Gain, and Sea Clutter adjustments in Harbour and Offshore Modes
• Dual EBL/VRM, Dual Guard Zones
• TrueColor display for improved target distinction
• Radar overlay on charts (requires heading sensor)
• 10-target MARPA tracking (requires heading sensor)
• iPad/Android tablet control with optional Go Free wireless module
• Ethernet connectivity, compatible with all Simrad NSE/NSS/NSO multifunction displays

Simrad HALO-4 Pulse Compression Radar

Product Details

See Near and Far, Simultaneously
Halo™ radar delivers an unprecedented mix of short and long range performance with its 4-foot open array, from just six metres (20 feet) to as far as 64 nautical miles. Monitor two distance ranges simultaneously in Dual Range mode, and take full advantage of Halo radar to keep an eye on faraway weather cells while monitoring channel markers and high speed watercraft up close. Pulse Compression technology means no compromises in detection at either range. Advanced digital signal processing helps to eliminate sea clutter, while Beam Sharpening technology provides enhanced separation between small or distant targets.

Safety, Weather, and Bird-Finder Radar
Halo radar delivers a comprehensive range of features to enhance your situational awareness and on-water safety. Monitor selected collision hazards with MARPA target tracking, or automatically highlight all approaching targets with the optional VelocityTrack™ Doppler motion-tracking upgrade. Keep watch on distant storm cells in Weather mode, your own real-time meteorological service. Halo radar also works as a powerful bird-finder, a must-have tool for sportfishing enthusiasts and pro anglers. Halo radar’s smart Weather and Bird modes require no manual tuning, just set the mode and go.

Ready in an Instant
Collision hazards won’t wait for your radar to start up – why should you? Halo radar’s solid-state technology is ready instantly from standby, and in just 16-25 seconds from a cold start. Avoid the 2-3 minute warm-up time associated with traditional pulse radar and trust Halo Radar to produce an immediate, accurate radar image when you need it. Halo radar’s low-power pulsed transmissions make it safe to run in anchorages and marinas, providing additional coverage in these high-collision-risk environments. Fast 48 RPM operation provides frequent position updates, while an advanced brushless motor and helical geartrain ensure quiet operation.

Key Features

• True 64nm range with 4-foot open array antenna
• Beam Sharpening for enhanced target separation
• Simultaneous Dual Range operation
• Dedicated Harbour, Offshore, Weather, and Bird modes
• High-speed 48 RPM operation for rapid updates
• Ready instantly from standby, and in 16-25 seconds from power-on
• MARPA target tracking (up to 10 targets, 20 in dual range)
• VelocityTrack™ Doppler technology for collision avoidance

Simrad HALO-6 Pulse Compression Radar

Product Details

See Near and Far, Simultaneously
Halo™ radar delivers an unprecedented mix of short and long range performance with its 6-foot open array, from just six metres (20 feet) to as far as 72 nautical miles. Monitor two distance ranges simultaneously in Dual Range mode, and take full advantage of Halo radar to keep an eye on faraway weather cells while monitoring channel markers and high speed watercraft up close. Pulse Compression technology means no compromises in detection at either range. Advanced digital signal processing helps to eliminate sea clutter, while Beam Sharpening technology provides enhanced separation between small or distant targets.

Safety, Weather, and Bird-Finder Radar
Halo radar delivers a comprehensive range of features to enhance your situational awareness and on-water safety. Monitor selected collision hazards with MARPA target tracking, or automatically highlight all approaching targets with the optional VelocityTrack™ Doppler motion-tracking upgrade. Keep watch on distant storm cells in Weather mode, your own real-time meteorological service. Halo radar also works as a powerful bird-finder, a must-have tool for sportfishing enthusiasts and pro anglers. Halo radar’s smart Weather and Bird modes require no manual tuning, just set the mode and go.

Ready in an Instant
Collision hazards won’t wait for your radar to start up – why should you? Halo radar’s solid-state technology is ready instantly from standby, and in just 16-25 seconds from a cold start. Avoid the 2-3 minute warm-up time associated with traditional pulse radar and trust Halo Radar to produce an immediate, accurate radar image when you need it. Halo radar’s low-power pulsed transmissions make it safe to run in anchorages and marinas, providing additional coverage in these high-collision-risk environments. Fast 48 RPM operation provides frequent position updates, while an advanced brushless motor and helical geartrain ensure quiet operation.

Key Features

• True 72nm range with 6-foot open array antenna
• Beam Sharpening for enhanced target separation
• Simultaneous Dual Range operation
• Dedicated Harbour, Offshore, Weather, and Bird modes
• High-speed 48 RPM operation for rapid updates
• Ready instantly from standby, and in 16-25 seconds from power-on
• MARPA target tracking (up to 10 targets, 20 in dual range)
• VelocityTrack™ Doppler technology for collision avoidance

TXL-25S-7 LOW EMSN 25KW 7′ ANT W/20M CA

Our HD Digital 25kW/96nm birdfinder radar combines a high performance 7-foot open array scanner with outstanding 1.0° beam resolution, and the latest in digital signal processing. Experience unparalleled situational awareness, with exceptional detection of small or distant targets and minimised screen-clutter. With a proven history of oceangoing reliability, this commercial-grade radar will withstand a sustained wind load of up to 100 knots, and features a long-life magnetron and brushless motor for maximum service life.

Product Details

96nm Range
With outstanding 96nm instrumented range and 1.0° beam resolution, the TXL-25S-7 is suitable for both offshore and inshore use. Don’t be caught unprepared for the conditions: with powerful 25kW transceiver, strong weather cells and front lines can be seen over 100nm away.

Target Detection and RACON/SART Triggering
When installed 15m (50’) above the waterline, the TXL-25S-7 scanner complies with tough IMO IEC62388 Annex D target detection specifications. In addition, it will trigger RACON navigational aids and SART locator beacons at a minimum of 5nm range, when installed just 5m (17’) high.

Dual EBL/VRM, Dual Guard Zones
Rapidly determine the bearing and distance to any radar target with dual Electronic Bearing Lines (EBL) and Variable Range Markers (VRM). Dual Guard Zones alarm on targets both entering and existing the zone, with independently configurable range and sensitivity.

Key Features

• 7-foot open-array antenna
• 96nm instrumented range with 1.0° beam resolution
• Meets IMO IEC62388 Annex D target detection specifications (triggers RACONs and SARTs at 5nm range)
• Automatic Tune, Gain, and Sea Clutter adjustments in Harbour and Offshore Modes
• Dual EBL/VRM, Dual Guard Zones
• TrueColor display for improved target distinction
• Radar overlay on charts (requires heading sensor)
• 10-target MARPA tracking (requires heading sensor)
• iPad/Android tablet control with optional Go Free wireless module
• Ethernet connectivity, compatible with all Simrad NSE/NSS/NSO multifunction displays

Broadband 4G™ Radar

Product details

See Near and Far

Broadband 4G™ radar relies on solid-state FMCW technology to detect targets from right off the bow out to 36 nautical miles away. See clearly at close range, where traditional radar systems can be blind to imminent collision hazards. Monitor two different range scales simultaneously in dual-range mode, and keep watch on nearby vessels while also keeping an eye on distant weather cells or landmarks. Beam Sharpening technology enhances target separation, giving you the sharpest images possible, while Harbour and Offshore modes optimise the radar image for ultimate clarity with no manual tuning required.

Designed for Situational Awareness

Great short-range performance makes Broadband 4G radar fantastic for tight manoeuvres in marinas, and for safe navigation in limited visibility such as darkness or fog. High-speed 48 RPM operation is available at ranges less than one nautical mile, delivering ultra-fast updates to maximise safety at times of high collision risk. MARPA target tracking lets you monitor up to ten selected radar targets (20 in dual-range mode), while dual guard zones automatically alert you of nearby hazards.

Perfect for Vessels of All Sizes

Low power consumption makes Broadband 4G radar ideal for boats of any size and type. InstantOn™ capability means no warm-up time from standby, giving you an immediate radar image when you need it without having to keep the system running when you don’t. A closed dome design and zero radiation hazard—with lower energy emissions than a mobile phone—make the system safe to mount almost anywhere on board. Installation is quick and easy, with no reason to open the dome and no radar-licensed technician required.

Key Features

• 0-36 NM range from one compact dome
• Beam Sharpening for enhanced target separation
• Simultaneous Dual Range operation
• High speed mode (48 RPM at ranges less than 1 NM)
• Ready instantly from standby
• MARPA target tracking (up to 10 targets, 20 in dual range)
• Low power consumption
• Zero radiation hazard
• Quick and easy installation

Specifications

HALO20 Radar

Unrivalled Short-to-Mid-Range Performance

Extend your view from the bow of your boat out to 24 nautical miles with pulse-compression radar technology that not only delivers a powerful mix of short and long-range detection, but provides precise target definition with minimal clutter.

Better Situational Awareness, Collision Avoidance

HALO20 radar delivers a comprehensive range of features to enhance your situational awareness and on-water safety. Monitor selected collision hazards with MARPA target tracking, tracking up to 10 targets. Whether you’re navigating through crowded waterways or contending with poor visibility, HALO20 radar cuts through the clutter to give you a clear and current picture of your surroundings.

Easy to Use

Harbour, Offshore and Weather modes tune HALO20 radar’s advanced signal processing to help ensure that targets can be seen vividly – even in the toughest environmental conditions.

Ready When You Are

HALO20 radar wakes instantly from its low-power standby mode, delivering high-speed radar coverage exactly when and where you need it. Even if your HALO20 is completely powered down start-up is a matter of seconds, not minutes like traditional pulse radar.

Key Features

• 10W Pulse Compression
• 24 nm range from a compact 20-inch dome
• Unrivalled short range
• Radiation safe
• Easy operation with harbour, offshore and weather mode
• MARPA target tracking
• InstantOn™
• Low Power Consumption
• Guard Zones

Specifications

HALO20+ Radar

See Near and Far with One Compact Dome

Perfect for a wide range of coastal bay boats, HALO20+ comes in a compact dome antenna and delivers high-quality short, mid and long-range detection. Monitor two distance ranges at once in Dual Range mode which enables you to keep an eye on far away weather cells while watching for collision hazards up close. HALO20+ radar’s pulse compression technology means no compromises in detection at either selected range, while beam sharpening provides better separation between small and distant targets.

The Ultimate View for Collision Avoidance

HALO20+ radar delivers a full 360 degree sweep every second, thanks to its industry-first 60 RPM rotation at ranges up to 1.5 nautical miles. These ultra-fast updates give you an almost real-time view at close range, offering the ultimate view for collision avoidance of fast moving targets.

VelocityTrack™ Doppler Technology Built-In

VelocityTrack™ technology provides instant visual feedback on whether targets are coming towards you or moving away. Simple color coding highlights potential hazards, improving your situational awareness and further reducing your risk of collision. HALO20+ radar automatically checks every target in range; there’s no need to manually select individual targets, and no limit to the number of targets on screen at one time.

Ready When You Are

HALO20+ radar wakes instantly from its low-power standby mode, delivering high-speed radar coverage exactly when and where you need it. Even if your HALO20+ is completely powered down start-up is a matter of seconds, not minutes like traditional pulse radar. Whether you’re navigating through crowded waterways or contending with poor visibility, HALO20+ radar immediately cuts through the clutter to give you a clear and current picture of your surroundings.

Easy to Use

Harbour, Offshore, Weather, Bird, and custom modes tune HALO20+ radar’s advanced signal processing to help ensure that targets can be seen vividly – even in the toughest environmental conditions.

Key Features

• 36 nm range from a compact 20-inch dome
• Advanced pulse compression technology with beam sharpening
• Simultaneous Dual Range operation sees both near and far
• Ultra-fast 60 RPM operation at ranges up to 1.5 nm
• VelocityTrack™ Doppler technology for collision avoidance
• Easy operation with harbour, offshore, weather, and bird modes
• MARPA target tracking (up to 10 targets, 20 in dual range)
• Ready instantly from standby

Specifications

HALO24 Radar

Welcome to HALO

HALO24 revolutionizes radar by offering an almost real-time view, with industry-first 60 RPM operation at close range for the ultimate in collision avoidance. Identify hazards in an instant with VelocityTrack™ Doppler technology, and enjoy simultaneous short and long-range coverage—up to 48 nautical miles—from one compact 24-inch dome antenna.

Key Features

• 48 nm range from a compact 24-inch dome
• Advanced pulse compression technology with beam sharpening
• Simultaneous Dual Range operation sees both near and far
• Ultra-fast 60 RPM operation at ranges up to 1.5 nm
• VelocityTrack™ Doppler technology for collision avoidance
• Easy operation with harbour, offshore, weather, and bird modes
• MARPA target tracking (up to 10 targets, 20 in dual range)
• Ready instantly from standby

Specifications

Mast Mount kit For 3G/4G Radar

Product details

SC20 Mast mount kit for Broadband Radar.

FOR RADOMES & SATCOMS

Still the first choice for boat owners the world over, Scanstrut leads the way with a new generation of Mast Mounts.

The larger mounting feet are stronger, stiffer and now even easier to fit ensuring that the Scanstrut Mast Mount is the most secure on the market.

The SC20 is the most universal fixed Mast Mount in the range, offering compatibility for Simrad 3G/4G radomes.

Key Features

UNIVERSAL MOUNTING

Attaches to mast with four swivel feet, matching a variety of mast profiles.

STRONG FIXING

12 point fixing using high quality monel rivets.

COMPACT MOUNTING

Antenna extends only minimum distance from the front of the mast ensuring a compact installation.

SAFETY WIRE KIT

Independently attaches scanner to mast in case an accident damages the installation.

COMPATIBILITY*

Radome:

Lowrance, Simrad & B&G: 3G / 4G

Scanstrut 6″ PowerTower for BR24 dome.

Product details

PT2004 PowerTower for Broadband Radar – 150mm (6″) white composite

Key Features…

Scanstrut 14″ PowerTower for 3G/4G Radar

Product details

For Radomes, Open Array and small SatCom/TV Antenna

Expertly designed to install your antenna on the cabin roof, flybridge or radar arch of your powerboat, providing a clear view of the horizon for maximum antenna performance.

Scanstrut’s Composite PowerTower offers a single “monocoque” structure for outstanding strength and surface finish. Its aerodynamic shape and high gloss finish makes a product that is as strong as it is attractive.

Key Features

Watertight Installation

Pre-fitted IP65 gland to seal cable entry into stem and a watertight base seal included so no need for messy sealant.

Ease of Install

Pre-drilled mounting holes, the antenna fastens to PowerTower top plate using own mounting bolts.

Choice of Heights

150mm (6”) or 350mm (14”) heights available.

Aesthetic Single Piece Moulding

Curves and strength to suit any boat with a 30° aft leaning profile to compliment any powerboat

R2009 Radar Control Unit

The R2009 is a dedicated control unit for Simrad radar systems and features an integrated 9-inch portrait display. An ideal safety and navigation accessory for offshore cruisers and sportfishing vessels, the R2009 offers versatile flush or bracket-mount installation options and intuitive keypad-based operation for reliable control in all conditions.

Product Details

9-inch Portrait Radar Control Unit
Make the most of your Simrad radar system by adding a dedicated screen and controls. Our professional-grade radar control units are easy to use, and designed to complement the design of our glass bridge displays and instruments. The R2009 features a compact and ultra-bright 9-inch display that’s perfect for centre consoles, and maximises screen size where you have limited mounting space available. Choose from a clean flush-mount installation, or the convenience of bracket mounting to install almost anywhere.

Simple and Reliable Operation
Take control of your radar system with the integrated keypad and rotary dial. Direct-access menu keys beside the display operate the corresponding on-screen menu options, for quick and intuitive access to key settings and features. Large, reliable buttons are suitable for use in any conditions, including the sort of wet weather and rough seas that make your radar system even more crucial to a safe journey home. Anti-sea clutter technology helps to deliver clarity in those adverse conditions, giving you the best possible view.

Widely Compatible and Easy to Install
The R2009 is compatible with a wide range of Simrad radar solutions. Ethernet connectivity offers easy installation, and simple networking of multiple control units and radar systems. The R2009 also includes dual NMEA 0183® ports and NMEA 2000® connectivity for compatible devices such as heading and speed sensors, AIS transceivers, and GPS receivers.

Key Features

• 9-inch portrait display
• High brightness for outside use
• Anti-sea-clutter technology for optimal clarity in adverse conditions
• MARPA target tracking
• Keypad and rotary-dial interface with 8 direct-access menu keys
• Bracket and flush-mount installation options

ForwardScan Transducer only

Know what lies ahead with ForwardScan. This compact transducer provides a forward-looking view of up to eight times your current depth, allowing you to navigate shallow or poorly-charted waters with confidence. Includes a standard ForwardScan transducer, ideal for boats already fitted with a ForwardScan sleeve and blanking plug.

Product details

Know What Lies Ahead
ForwardScan uses forward-looking sonar to give you a clear view of the bottom ahead of your boat. This award-winning technology is a powerful defence against running aground in shallow, unfamiliar, or poorly-charted waters. ForwardScan generally offers a forward view of 4-5 times your current depth; for example in 3 metres (10 feet) of water, see the bottom 12-15 metres (40-50 feet) ahead. Under ideal conditions ForwardScan can see even further, looking ahead up to 8 times your current depth. The 180 kHz ForwardScan transducer is designed to minimise interference from common 200 kHz transducers, enabling it to be used alongside existing fish-finding or depth-tracking sonar.

Simple 2D View and Chart Overlay
See a simple, immediately understandable view of the bottom ahead. Bottom Colour Tracking shows the bottom as a solid terrain in an uncluttered, side-on picture. For more detail, you can choose to display sonar returns from throughout the water column; these can illustrate other potential hazards such as dock posts. Perfect for cruising, you can also overlay ForwardScan depth data on charts: Heading Line View uses colour-coded segments to represent deep, medium, and shallow water ahead. Depths are customisable to suit your boat’s draught, and a shallow depth alarm helps to ensure you’re never caught unaware.

Easy On-Water Installation for ForwardScan-Ready Boats
The ForwardScan transducer can be installed on the water, in just a few minutes, for boats already fitted with the ForwardScan mounting sleeve. Just remove the blanking plug, install the transducer into the sleeve, and connect the cable to your compatible Simrad multifunction display or sounder module. A self-closing valve built into the sleeve minimizes water ingress during installation. For boats without a pre-fitted sleeve, the complete ForwardScan kit (sold separately) includes a transducer, sleeve, and fairing block.

Key Features

• Simple 2D view of the bottom ahead
• Navigate safely with ForwardScan data overlaid on charts
• Look ahead up to 8 times your current depth (generally 4-5 times)
• Designed to minimize interference from existing 200 kHz transducers
• Built-in water temperature sensor offers extra value
• Easy installation and maintenance with an on-water removable transducer
• Connects to the StructureScan® HD port on compatible displays or sounder modules

PSI-1 Performance Sonar Interface

Enable LiveSight Sonar on your NSS evo3 display by adding the PSI-1 Performance Sonar Interface to your system.

Product details

With a PSI-1 Interface and a LiveSight Sonar transducer installed on your NSS evo3 system, you can watch fish react to your lure – as it happens – giving you insight on what’s working, what isn’t and what to do next.

NSO evo3 requires a SonarHub and the PSI-1 module for LiveSight compatiblity.

Key Features

• Enables LiveSight Sonar compatibility on NSS evo3
• Easy to install
• Compact

HDI Skimmer Low/High 455/800 9 pin

HDI Low/High/455/800kHz xSonic Transducer

Product details

This HDI xSonic Transducer features a 9-pin connector, supports Low and High CHIRP, plus DownScan Imaging™.

Key Features

• HDI Skimmer transducer
• Low/High with 9-pin connector
• Provides ideal sounding performance and cleanest sounder returns
• Built-in sensor for water-temp readings

xSonic Airmar B45

The B45 is a bronze, depth/temp thru-hull transducer featuring 50/200 kHz sonar frequencies.

Product details

The B45 is Airmar’s smallest, bronze, thru-hull stem, offering quality design at an economical price. The classic housing is streamlined to deflect aerated water from the transducer’s face, providing solid echo returns.

Transom-mount, 50 kHz/200 kHz Broadband and DownScan™ Transducer

The HDI Skimmer 50/200 is a transom-mounted Broadband and DownScan™ transducer, ideal for smaller outboards and I/O vessels up to 8 m (25 ft) in length, in depths of less than 900 m (3000 ft).

Product details

Dual Frequency
The dual-frequency HDI Skimmer 50/200 includes a single ceramic element delivering both 50 kHz with a 29° beam width, and 200 kHz with a 12° beam width. 50 kHz low-frequency operation offers a maximum operational depth of 900 m (3000 ft), while 200 kHz high-frequency provides higher-resolution fish arches and bottom detail in shallower water.

DownScan Imaging™
High-frequency 455/800 kHz DownScan Imaging provides a life-like representation of the water column, bottom, and any structure beneath your vessel: see fish, rocks, weeds, and wrecks clearly pictured your multifunction display. DownScan is a powerful tool for locating fish-holding structure, finding wrecks or reefs to dive, or conducting searches and surveys.

Depth/Temperature
One sensor does it all. Able to measure both depth and temperature in a single package, the HDI Skimmer 50/200 simplifies installation and requires just one connection to your echosounder module or multifunction display.

Mounting
The HDI Skimmer 50/200 is suitable for transom mounting on any hull. Transom-mounted transducers are designed for smaller outboard and I/O boats, and are well suited to planing hulls. Transom mounting offers simple installation and maintenance, and the transducer can be adjusted easily to compensate for transom angle.

Key Features

• 50 kHz with 29° beam width
• 200 kHz with 12° beam width
• Up to 900 m (3000 ft) range at 50 kHz
• 1 internal broadband ceramic
• Transom-mounted
• Suitable for any hull
• Ideal for outboards and I/O vessels up to 8 m (25 ft) in length
• Recommended for use with the SonarHub sounder module & Simrad NSS evo2 multifunction displays

Active Imaging 2-in-1 Transducer

Perfect for pinpointing fish-holding areas like rockpiles, standing timber, weedbeds, ditches and drop-offs, Active Imaging™ 2-in-1 sonar delivers superior clarity and the highest resolution images of fish and structure at a longer range than any other structure imaging technology.

Product details

See structure and cover with a new level of refined detail and at a range unmatched by any other structure imaging technology with Active Imaging™ 2-in-1 sonar featuring SideScan and DownScan. The high-level clarity, target separation and detail of Active Imaging will help you find more fish by making it easier to quickly identify fish-holding structure like rockpiles, standing timber, weedbeds, ditches and drop-offs – all at a greater distance from your boat. Active Imaging 2-in-1 sonar is perfect for use with a separate traditional sonar transducer.

Key Features

• Perfect for use with a separate traditional sonar transducer
• More refined detail and better range than any other imaging technology
• Supports SideScan and DownScan (455/800kHz)
• Compatible with Simrad NSS evo3 and GO series displays

Verado Fittings Kit

ForwardScan Sleeve and Plug

This stainless steel sleeve with self-closing valve enables easy on-water installation of a standard ForwardScan transducer, and can be pre-installed by boat builders to make new vessels ForwardScan ready through a simple DIY on-water upgrade.

Product Details

ForwardScan suits almost any vessel and hull type, with a stainless steel through-hull mounting sleeve. The sleeve and an optional fairing block can accommodate up to 29 mm (1.15 inch) thick hulls at 12 degrees deadrise, or up to 19 mm (3/4 inch) thick hulls at 20 degrees. A built-in self-closing valve means the ForwardScan transducer can be inserted and removed from the sleeve while on the water, simplifying transducer installation and maintenance. By pre-installing the ForwardScan sleeve and fitting the included watertight blanking plug, boat builders can make a new vessel ForwardScan-ready and allow the transducer to be added later as a DIY on-water upgrade.

Key Features

• Stainless steel sleeve for the standard ForwardScan transducer
• Suits hulls up to 29 mm (1.15 inches) thick
• Self-closing valve allows on-water transducer removal
• Includes blanking plug

xSonic Airmar P319

Plastic, Thru-Hull, 50 kHz/200 kHz Broadband transducer

Product Details

The P319 is a compact, plastic, thru-hull, dual-frequency (50/200 kHz) sensor that offers depth and temperature data. Ideal for planing hull powerboats and sailboats.

Key Features

• Requires just one hole in the hull to receive data for both depth and temperature.
• Works at 50 kHz and 200 kHz for good target detail in shallow water and excellent bottom tracking in deep water.
• Provides extremely accurate data.
• Just 5mm extends outside of the hull.

WR10 Wireless Remote only

The WR10 works with Simrad autopilot systems to enable precise heading adjustments and autopilot control from anywhere on board. Long-range Bluetooth technology provides up to 30 metres range. Up to four of these compact, lightweight remotes can be paired with a single BT1 base station (sold separately).

Product Details

Easy to Use
The WR10 uses just five simple buttons to deliver intuitive autopilot control. Steer or adjust autopilot heading in precise one-degree or quick 10-degree increments. Easily switch between full autopilot to navigate to the next waypoint on your current route, and NoDrift steering to automatically maintain your current heading. Dedicated Standby and Engage buttons mean you can be sure your autopilot is on or off with a single button press – even if you don’t know what state it’s in to begin with. The WR10’s multi-coloured LED indicates when each command has been successfully received by your autopilot, and displays a low battery warning so you’ll never be caught out.

Easy to Carry
A remote is only useful when it’s in your hand. Compact and lightweight, the WR10 was designed with this in mind: the included lanyard offers a range of attachment options, or the WR10 can be wrist-mounted for even quicker and easier access. Though compact, the WR10 was also designed to maximise button size; this remote is easy to use by any fingers in any conditions.

Easy to Install
The WR10 is a simple do-it-yourself upgrade to any compatible Simrad autopilot system. Up to four remotes can be paired with a single BT1 base station (sold separately) to equip multiple crewmembers for remote autopilot control.

Key Features

• Easy to use, simple to install
• Compact, lightweight remote with large buttons
• Steer or set heading in 1° and 10° increments
• Dedicated autopilot standby and engage buttons
• Wristband or lanyard attachment
• Up to 30 metres range
• Works with the BT1 base station (sold separately)

XSONIC AIRMAR TM150M

Transom-mounted, 95-155 kHz Single Channel CHIRP transducer

Product details

The TM150M is a transom-mounted CHIRP transducer, ideal for sportfishing and commercial vessels up to 25ft in length. This single-channel transducer offers Medium CHIRP for a balance between the great depth penetration of Low CHIRP, and the superior target resolution of High CHIRP.

TotalScan Skimmer 6ft M/H 455/800Hz

TotalScan™ Skimmer Mid/High/StructureScan HD with 2m (6ft) transducer cable.

Product details

The TotalScan™ Skimmer Transducer will now allow anglers to access Medium CHIRP, High CHIRP, DownScan™ Imaging and StructureScan™ using only a single transducer mounted to the transom, jackplate or a flat surface (appropriate mounting brackets required based on mounting location).

Key Features

• All-in-one transducer featuring Broadband, CHIRP, StructureScan HD and DownScan Imaging™
• Supports 83/200kHz Broadband sonar frequencies
• Supports Medium and High CHIRP frequencies
• Supports 455/800kHz StructureScan® frequencies
• Supports Water Temperature
• Multiple mounting options

Xsonic Bronze HDI XDCR 0 Deg

Bronze, Thru-Hull 50/200/455/800 kHz xSonic HDI Transducer (0° Tilt)

Product details

The HDI (Hybrid Dual Imaging) xSonic Transducer is a bronze, thru-hull transducer providing Low and High CHIRP, plus DownScan Imaging™.

Key Features

• Provides 50/200kHz traditional frequencies PLUS 455/800kHz Down Scan Imaging plus temperature
• Available in 0°12°20°tilt angles
• 10 m (33 ft) cable

xSonic SS60 Stainless Steel Thru Hull Low Profile Transducer with 20° Tilt

The SS60 is a Stainless Steel, thru-hull, tilted, dual-frequency, depth and temperature transducer. The ceramic element is tilted for built-in deadrise compensation, giving excellent echo returns for more accurate depth readings.

Product details

The SS60 is a stainless steel, thru-hull broadband transducer, ideal for smaller sportfishing and commercial vessels up to 25ft in length, fishing in depths of down to 3000ft. The low profile housing minimises drag with just 5mm extending outside of the hull, the 20° tilt is ideal for boats with a 16° to 24° hull deadrise.

Works at 50 kHz and 200 kHz for good target detail in shallow water and excellent bottom tracking in deep water.

Key Features

• 20 degree tilt
• Stainless Steel
• Dual frequency (50kHz and 200 kHz)
• Temperature sensor for accurate water temperature readings
• Calculates depth

xSonic SS60 Stainless Steel Thru Hull Low Profile Transducer with 12° Tilt

Stainless Steel, Thru-Hull 50/200 kHz Broadband Transducer (12° Tilt)

Product details

The SS60 is a stainless steel, thru-hull broadband transducer, ideal for smaller sportfishing and commercial vessels up to 25ft in length, fishing in depths of down to 3000ft.

Key Features

• 20 degree tilt
• Stainless Steel
• Dual frequency (50kHz and 200 kHz)
• Temperature sensor for accurate water temperature readings
• Calculates depth

XSonic Airmar SS60 0° Tilt

The SS60 is a Stainless Steel, thru-hull, tilted, dual-frequency, depth and temperature transducer. The ceramic element is tilted for built-in deadrise compensation, giving excellent echo returns for more accurate depth readings.

Product details

The SS60 is a stainless steel, thru-hull broadband transducer, ideal for smaller sportfishing and commercial vessels up to 25ft in length, fishing in depths of down to 3000ft. The low profile housing minimises drag with just 5mm extending outside of the hull, the 12° tilt is ideal for boats with a 8° to 15° hull deadrise.

Works at 50 kHz and 200 kHz for good target detail in shallow water and excellent bottom tracking in deep water.

Key Features

• 0 degree tilt
• Stainless Steel
• Dual frequency (50kHz and 200 kHz)
• Temperature sensor for accurate water temperature readings
• Calculates depth

StructureScan 3D Transducer

This Skimmer® transducer works with the StructureScan® 3D module (sold separately) to create a high resolution, three dimensional view of underwater terrain and fish-holding structure. The included bracket enables easy transom or step mounting, and jackplate or flush-mount step installation are also supported via optional mounting kits.

Product details

This Skimmer® transducer works with the StructureScan® 3D module (sold separately) to create a high resolution, three dimensional view of underwater terrain and fish-holding structure. Immediately see where fish and structure are located in relation to your boat, with a picture-like view you can easily pan, tilt, and rotate for the perfect perspective. The included bracket enables easy transom or step mounting, and jackplate or flush-mount step installation are supported via optional mounting kits.

Key Features

• StructureScan® 3D imaging transducer
• Scans up to 180 metres (600 feet) to each side of your boat
• Supports transom, step, or jackplate mounting

XSonic Airmar B150M Transducer 0° Tilt

Bronze 0° Tilt Medium frequency CHIRP transducer suitable for through hull mounting

Product details

The B150M is a bronze, thru-hull CHIRP transducer, ideal for sportfishing and commercial vessels up to 8m (25ft) in length.This single-channel transducer offers Medium CHIRP for a balance between the great depth penetration of Low CHIRP, and the superior target resolution of High CHIRP.

Key Features

• Ideal for inshore or coastal fishing in shallow to medium depths
• CHIRPs from 95-155kHz to provide 60kHz of total bandwidth from one transducer
• Black 9 pin connector
• Cable length 10 m (33.0 ft)

DST800 Depth, Speed, Temperature Sensor With Plastic Housing

Thru-hull, 235kHz multisensor offering depth, speed and temperature data in one compact housing.

Product details

The DST800 thru-hull transducer features a plastic thru-hull design and supports 235 kHz transducer frequency.

Key Features

• Depth/Speed/Temperature
• 235kHz
• Highly Accurate
• Innovative Housing
• NMEA2000® Connectivity

DT800 Depth and Temperature sensor

NMEA 2000 Through-Hull Depth/Temperature Sensor

Product details

NMEA 2000 Depth/Temperature sensor with zero degree (untilted) element. Includes a 51mm (2″) plastic flanged through-hull housing. Sensor uses standard PGNs and comes with Micro-C connectors enabling easy connection to an NMEA2000 backbone. This sensor does not have a speed sensor connection

Key Features

• Plastic Through-hull housing
• 0 degree sensor
• 2m Micro-C cable (without speed connection)
• NMEA 2000

Active Imaging 3-in-1 Transducer

Perfect for pinpointing fish-holding areas like rockpiles, standing timber, weedbeds, ditches and drop-offs, Active Imaging™ 3-in-1 sonar delivers superior clarity and the highest resolution images of fish and structure at a longer range than any other structure imaging technology.

Product details

See structure and cover with a new level of refined detail and at a range unmatched by any other structure imaging technology with Active Imaging™ 3-in-1 sonar featuring CHIRP, SideScan and DownScan with FishReveal™. The high-level clarity, target separation and detail of Active Imaging will help you find more fish by making it easier to quickly identify fish-holding structure like rockpiles, standing timber, weedbeds, ditches and drop-offs – all at a greater distance from your boat. Get the best of CHIRP sonar and DownScan on one screen with the exclusive FishReveal™ Smart Target view that helps you easily recognize fish from structure and cover on high-detailed DownScan images.

Key Features

• More refined detail and better range than any other imaging technology
• Active Imaging 3-in-1 transducer with Lowrance CHIRP, SideScan and DownScan
• Easier target identification with FishReveal™ Smart Target View
• Supports Medium and High CHIRP (83/200kHz) + 455/800kHz frequencies
• Compatible with Simrad NSS evo3 and GO series displays

WR10 Wireless Remote only

The WR10 works with Simrad autopilot systems to enable precise heading adjustments and autopilot control from anywhere on board. Long-range Bluetooth technology provides up to 30 metres range. Up to four of these compact, lightweight remotes can be paired with a single BT1 base station (sold separately).

Product Details

Easy to Use
The WR10 uses just five simple buttons to deliver intuitive autopilot control. Steer or adjust autopilot heading in precise one-degree or quick 10-degree increments. Easily switch between full autopilot to navigate to the next waypoint on your current route, and NoDrift steering to automatically maintain your current heading. Dedicated Standby and Engage buttons mean you can be sure your autopilot is on or off with a single button press – even if you don’t know what state it’s in to begin with. The WR10’s multi-coloured LED indicates when each command has been successfully received by your autopilot, and displays a low battery warning so you’ll never be caught out.

Easy to Carry
A remote is only useful when it’s in your hand. Compact and lightweight, the WR10 was designed with this in mind: the included lanyard offers a range of attachment options, or the WR10 can be wrist-mounted for even quicker and easier access. Though compact, the WR10 was also designed to maximise button size; this remote is easy to use by any fingers in any conditions.

Easy to Install
The WR10 is a simple do-it-yourself upgrade to any compatible Simrad autopilot system. Up to four remotes can be paired with a single BT1 base station (sold separately) to equip multiple crewmembers for remote autopilot control.

Key Features

• Easy to use, simple to install
• Compact, lightweight remote with large buttons
• Steer or set heading in 1° and 10° increments
• Dedicated autopilot standby and engage buttons
• Wristband or lanyard attachment
• Up to 30 metres range
• Works with the BT1 base station (sold separately)

WR10 Wireless Remote only

The WR10 works with Simrad autopilot systems to enable precise heading adjustments and autopilot control from anywhere on board. Long-range Bluetooth technology provides up to 30 metres range. Up to four of these compact, lightweight remotes can be paired with a single BT1 base station (sold separately).

Product Details

Easy to Use
The WR10 uses just five simple buttons to deliver intuitive autopilot control. Steer or adjust autopilot heading in precise one-degree or quick 10-degree increments. Easily switch between full autopilot to navigate to the next waypoint on your current route, and NoDrift steering to automatically maintain your current heading. Dedicated Standby and Engage buttons mean you can be sure your autopilot is on or off with a single button press – even if you don’t know what state it’s in to begin with. The WR10’s multi-coloured LED indicates when each command has been successfully received by your autopilot, and displays a low battery warning so you’ll never be caught out.

Easy to Carry
A remote is only useful when it’s in your hand. Compact and lightweight, the WR10 was designed with this in mind: the included lanyard offers a range of attachment options, or the WR10 can be wrist-mounted for even quicker and easier access. Though compact, the WR10 was also designed to maximise button size; this remote is easy to use by any fingers in any conditions.

Easy to Install
The WR10 is a simple do-it-yourself upgrade to any compatible Simrad autopilot system. Up to four remotes can be paired with a single BT1 base station (sold separately) to equip multiple crewmembers for remote autopilot control.

Key Features

• Easy to use, simple to install
• Compact, lightweight remote with large buttons
• Steer or set heading in 1° and 10° increments
• Dedicated autopilot standby and engage buttons
• Wristband or lanyard attachment
• Up to 30 metres range
• Works with the BT1 base station (sold separately)

XSONIC AIRMAR P79

Plastic, In-Hull, 50/200 kHz, Depth Transducer

Product Details

The P79 is a plastic, in-hull dual-frequency, depth sensor. Easy to install and accomodating deadrise angles up to 22°, it is ideal for inshore use on motorboats with outboard engines, small racing yachts and RIBs.

PTI-WBL Ice Transducer

Product details

PTI-WBL – Ice transducer with blue connector

Key Features

• 83 kHz With 52° Beam Width
• 200 kHz With 22° Beam Width
• Up to 1000-Foot (300-Meter) Range at 83 kHz
• 1 Internal Broadband Ceramic
• Ice mount
• Compatible with all Blue sonar connector displays

83/200 kHz Transom Mount Skimmer with Temp

Plastic, transom-mounted, 83 kHz/200 kHz broadband transducer

Product details

The HST-WSBL is a plastic, transom-mounted Broadband Skimmer® transducer, ideal for smaller outboards and I/O vessels up to 25-feet (8-meters) in length, in depths of less than 1000-feet (300-meters).

Key Features

• 83 kHz With 52° Beam Width
• 200 kHz With 22° Beam Width
• Up to 1000-Foot (300-Meter) Range at 83 kHz
• 1 Internal Broadband Ceramic
• Transom-Mounted with Plastic Housing
• Suitable for Any Hull

Cruise / Hook² 83/200 Skimmer Transducer

ForwardScan Fairing Block

This fairing block suits the standard ForwardScan transducer, and accommodates a deadrise angle of up to 20 degrees.

Product details

For optimal accuracy and performance, the ForwardScan transducer must be installed parallel to the waterline. This fairing block supports level installation of the standard ForwardScan transducer, and can be cut to accommodate hulls up to 29 mm (1.15 inch) thick at up to 12 degrees deadrise, or 19 mm (3/4 inch) thick at up to 20 degrees deadrise.

Key Features

• Fairing block for the standard ForwardScan transducer
• Accommodates a deadrise of up to 20 degrees

ForwardScan Blanking Plug

This blanking plug provides a watertight seal for the standard ForwardScan sleeve while no transducer is installed.

Product details

The ForwardScan transducer can be removed from its stainless steel sleeve for maintenance. Alternatively, new boats may be fitted with an empty sleeve to allow easy on-water installation of the ForwardScan transducer at a later date. The sleeve features a self-closing valve to minimize water ingress when the transducer is first removed, but a blanking plug is required to provide a fully watertight seal in the absence of a transducer.

Key Features

• Blanking plug for the standard ForwardScan sleeve
• Provides a watertight seal while no transducer is installed

STRUCTURE SCAN HD BRONZE THRUHULL SINGLE

This blanking plug provides a watertight seal for the standard ForwardScan sleeve while no transducer is installed.

Product details

Bronze StructureScan™ HD Sonar thru-hull transducer. (Single)

AIRMAR CHIRP TM 150 XDCR

The TM150M is a transom-mounted CHIRP transducer, ideal for sportfishing and commercial vessels up to 8 m (25 ft) in length. This single-channel transducer offers Medium CHIRP for a balance between the great depth penetration of Low CHIRP, and the superior target resolution of High CHIRP.

Product details

Single Channel CHIRP
Using pulsed transmissions swept across a range of frequencies, CHIRP technology delivers target resolution and depth penetration superior to traditional single-frequency sonar. This single channel CHIRP transducer operates anywhere in the 95-155 kHz Medium CHIRP frequency range, with a 26-17° beam width. The TM150M provides an operating depth of up to 300 m (1000 ft).

Depth/Temperature
One sensor does it all. Able to measure both depth and temperature in a single package, the TM150M simplifies installation and requires just one connection to your echosounder module or multifunction display.

Mounting
The TM150M is suitable for transom mounting on fiberglass, wood and metal hulls. Transom-mounted transducers are designed for smaller outboard and I/O boats, and are well suited to planing hulls. Transom mounting offers simple installation and maintenance, and the transducer can be adjusted easily to compensate for transom angle.

Key Features

• 95-155 kHz Medium CHIRP with 26-17° beam width
• Up to 300 m (1000 ft) range
• 1 internal broadband ceramic
• Transom-mounted
• Suitable for fiberglass, wood and metal hulls
• Ideal for sportfishing and commercial vessels up to 8 m (25 ft) in length

StructureScan® HD Imaging Module

Find fish more easily, explore below the surface or find the perfect spot to anchor. StructureScan® HD enables boaters to see exactly what’s below their boat with crisp, clear imagery to the left, right and directly beneath, at depths of up to 100m. The latest HD generation delivers greater resolution and wider range for enhanced underwater imagery.

Product details

The Whole Picture
Enjoy full, detailed, panoramic underwater images with combined SideScan and DownScan Imaging™, for a complete high-definition view of the underwater world.
DownScan™ ImagingAdd a new dimension to echosounding. This high frequency imaging gives a life-like representation of the water column, the bottom and any structure. See fish, rocks, weeds and wrecks.

SideScan Imaging
Crisp side-viewing StructureScan® HD detail up to 600ft/183m – a massive 20% increase compared with the original StructureScan®.
TrackBack™Scroll back through the echosounder history to mark fish or structure that you just passed over, so that you can easily navigate back.

Downscan Overlay
Exclusive technology allows you to overlay DownScan imaging onto Broadband Sounder™ on the same display to clearly separate fish from structure.

Enhanced Navigation
StructureScan® HD combines with highly-detailed cartography to provide boaters with unrivalled imagery of their immediate surroundings both above and below the surface for the ultimate in situational awareness.

Colour Palette Options
Adjust transparency and colour to locate targets more easily.

Ethernet Connectivity
Connect to an NSS, NSE or NSO navigation system with ease.

Key Features

• The Whole Picture
• DownScan™ Imaging
• SideScan Imaging
• TrackBack™
• Downscan Overlay
• Enhanced Navigation
• Colour Palette Options
• Ethernet Connectivity

STRUCTURE SCAN HD BRNZE THRUHULL STARBRD

Product details

Bronze StructureScan™ HD Sonar thru-hull transducer. (Stbd.)

TS-1BL Temperature Sensor

TS-1BL Temperature sensor (non-networked)

Product details

TS-1BL Temperature sensor (non-networked)

83/200 kHz Shoot Thru Skimmer with Temp

The PDT-WBL is a in-hull or trolling-motor-mounted Broadband transducer, ideal for smaller outboards and I/O vessels up to 8 m (25 ft) in length, in depths of less than 300 m (1000 ft).

Product details

Dual Frequency
The dual-frequency PDT-WBL includes a single ceramic element delivering both 83 kHz with a 52° beam width, and 200 kHz with a 22° beam width. 83 kHz low-frequency operation offers a maximum operational depth of 300 m (1000 ft), while 200 kHz high-frequency provides higher-resolution fish arches and bottom detail in shallower water.

Depth/Temperature
One sensor does it all. Able to measure both depth and temperature in a single package, the PDT-WBL simplifies installation and requires just one connection to your echosounder module or multifunction display.

Mounting
The PDT-WBL is suitable for in-hull mounting in fiberglass hulls, or trolling-motor mounting with any hull type.

In-hull or “shoot-thru-hull” transducers don’t require a hole to be drilled in your boat’s hull for installation, and offer good high-speed performance and ease of maintenance, but reduced maximum depth and fishfinding performance versus thru-hull, transom, or other in-water installations.

Key Features

• 83 kHz with 52° beam width
• 200 kHz with 22° beam width
• Up to 300 m (1000 ft) range at 83 kHz
• 1 internal broadband ceramic
• In-hull/Trolling Motor-mounted ‘pod style’
• Suitable for fiberglass hulls
• Ideal for outboards and I/O vessels up to 8 m (25 ft) in length
• Recommended for use with the SonarHub sounder module, Simrad NSS evo2 & NSS sport multifunction displays

Transom/Trolling Motor-mounted, 455 kHz/800 kHz DownScan Transducer

The HDI Skimmer 455/800 is a transom or trolling-motor-mounted DownScan™ transducer, ideal for smaller outboards and I/O vessels up to 8 m (25 ft) in length, in depths of less than 90 m (300 ft).

Product Details

DownScan Imaging™
High-frequency 455/800 kHz DownScan Imaging provides a life-like representation of the water column, bottom, and any structure beneath your vessel: see fish, rocks, weeds, and wrecks clearly pictured your multifunction display. DownScan is a powerful tool for locating fish-holding structure, finding wrecks or reefs to dive, or conducting searches and surveys.

Depth/Temperature
One sensor does it all. Able to measure both depth and temperature in a single package, the HDI Skimmer 455/800 simplifies installation and requires just one connection to your echosounder module or multifunction display.

Mounting
The HDI Skimmer 455/800 is suitable for transom or trolling-motor mounting with any hull type. Transom-mounted transducers are designed for smaller outboard and I/O boats, and are well suited to planing hulls. Transom mounting offers simple installation and maintenance, and the transducer can be adjusted easily to compensate for transom angle. Trolling motor-mounting is quick and easy, providing superior performance to in-hull (shoot-thru) installations while requiring no holes to be drilled in the hull or transom.

Key Features

• 455 kHz with 6.4° beam width
• 800 kHz with 12° beam width
• Up to 90 m (300 ft) range at 455 kHz
• 1 internal broadband ceramic
• Transom/Trolling Motor-mounted
• Suitable for any hull
• Ideal for outboards and I/O vessels up to 8 m (25 ft) in length
• Recommended for use with the SonarHub sounder module & Simrad NSS evo2 multifunction displays
• Cable Length 6m (20 ft)

BLACK HDI SKIMMER MED/HIGH 455/800 9PIN

Hybrid Dual Imaging™ (HDI) transducer (83/200/455/800) – The power of two award-winning technologies — Broadband Sounder PLUS Exclusive DownScan Imaging™ — combined to provide the best-possible view beneath your boat.

The HDI Black Med/High/455/800kHz xSonic Transducer has a 9-pin connector and supports Medium and High CHIRP, plus DownScan Imaging™.

Key Features

• HDI Skimmer® Transducer

BLACK HDI SKIMMER MED/HIGH 455/800 9PIN

Hybrid Dual Imaging™ (HDI) transducer (83/200/455/800) – The power of two award-winning technologies — Broadband Sounder PLUS Exclusive DownScan Imaging™ — combined to provide the best-possible view beneath your boat.

The HDI Black Med/High/455/800kHz xSonic Transducer has a 9-pin connector and supports Medium and High CHIRP, plus DownScan Imaging™.

Key Features

• HDI Skimmer® Transducer

BLACK HDI SKIMMER MED/HIGH 455/800 9PIN

HDI Skimmer® transducer 83/200/455/800kHz with built in temp. Includes mounting bracket and hardware. Cable Length 2m (6ft)

Product details

Hybrid Dual Imaging™ (HDI) transducer (83/200/455/800) – The power of two award-winning technologies — Broadband Sounder PLUS Exclusive DownScan Imaging™ — combined to provide the best-possible view beneath your boat.

2m (6ft) cable length is perfect for kayaks.

ST800 Speed/Temperature Sensor

ST800 Speed/Temperature Sensor

Product details

ST800 passive S/T sensor TH plastic with 1 m (7 ft) Pigtail (add speed to D800 (22098560)

HST-DFSBL 50/200 kHz Transom Mount Skimmer c/w Temp and 20 ft Cable

The HST-DFSBL is a plastic, transom-mounted Broadband Skimmer® transducer, ideal for smaller outboards and I/O vessels up to 8 m (25 ft) in length, in depths of less than 900 m (3000 ft).

Product details

Dual Frequency
The dual-frequency HST-DFSBL includes a single ceramic element delivering both 50 kHz with a 29° beam width, and 200 kHz with a 12° beam width. 50 kHz low-frequency operation offers a maximum operational depth of 900 m (3000 ft), while 200 kHz high-frequency provides higher-resolution fish arches and bottom detail in shallower water.

Depth/Temperature
One sensor does it all. Able to measure both depth and temperature in a single package, the HST-DFSBL simplifies installation and requires just one connection to your echosounder module or multifunction display.

Mounting
With plastic housing, the HST-DFSBL is suitable for transom mounting on any hull. Transom-mounted transducers are designed for smaller outboard and I/O boats, and are well suited to planing hulls. Transom mounting offers simple installation and maintenance, and the transducer can be adjusted easily to compensate for transom angle.

Key Features

• 50 kHz with 29° beam width
• 200 kHz with 12° beam width
• Up to 900 m (3000 ft) range at 50 kHz
• 1 internal broadband ceramic
• Transom-mounted with plastic housing
• Suitable for any hull
• Ideal for outboards and I/O vessels up to 8 m (25 ft) in length
• Recommended for use with the SonarHub sounder module, Simrad NSS evo2 & NSS sport multifunction displays

PDRT-WBL 83/200 kHz Shoot Thru Skimmer c/w Temp

The PDRT-WBL is a plastic, in-hull Broadband transducer, ideal for smaller outboards and I/O vessels up to 8 m (25 ft) in length, in depths of less than 300 m (1000 ft).

Product details

Dual Frequency
The dual-frequency PDRT-WBL includes a single ceramic element delivering both 83 kHz with a 52° beam width, and 200 kHz with a 22° beam width. 83 kHz low-frequency operation offers a maximum operational depth of 300 m (1000 ft), while 200 kHz high-frequency provides higher-resolution fish arches and bottom detail in shallower water.

Depth/Temperature
One sensor does it all. Able to measure both depth and temperature in a single package, the PDRT-WBL simplifies installation and requires just one connection to your echosounder module or multifunction display.

Mounting
With plastic housing, the PDRT-WBL is suitable for in-hull mounting in fiberglass hulls. In-hull or “shoot-thru-hull” transducers don’t require a hole to be drilled in your boat’s hull for installation, and offer good high-speed performance and ease of maintenance, but reduced maximum depth and fishfinding performance versus thru-hull, transom, or other in-water installations.

Key Features

• 83 kHz with 52° beam width
• 200 kHz with 22° beam width
• Up to 300 m (1000 ft) range at 83 kHz
• 1 internal broadband ceramic
• In-hull ‘pod style’ with plastic housing and remote temperature sensor
• Suitable for fiberglass hulls
• Ideal for outboards and I/O vessels up to 8 m (25 ft) in length
• Recommended for use with the SonarHub sounder module, Simrad NSS evo2 & NSS sport multifunction displays

83/200 kHz Shoot Thru Skimmer

The PD-WBL is a plastic, in-hull or trolling-motor-mounted Broadband transducer, ideal for smaller outboards and I/O vessels up to 8 m (25 ft) in length, in depths of less than 300 m (1000 ft).

Product details

Dual Frequency

The dual-frequency PD-WBL includes a single ceramic element delivering both 83 kHz with a 52° beam width, and 200 kHz with a 22° beam width. 83 kHz low-frequency operation offers a maximum operational depth of 300 m (1000 ft), while 200 kHz high-frequency provides higher-resolution fish arches and bottom detail in shallower water.

Mounting

With plastic housing, the PD-WBL is suitable for in-hull mounting in fiberglass hulls, or trolling-motor mounting with any hull type.

In-hull or “shoot-thru-hull” transducers don’t require a hole to be drilled in your boat’s hull for installation, and offer good high-speed performance and ease of maintenance, but reduced maximum depth and fishfinding performance versus thru-hull, transom, or other in-water installations.

Key Features

• 83 kHz with 52° beam width
• 200 kHz with 22° beam width
• Up to 300 m (1000 ft) range at 83 kHz
• 1 internal broadband ceramic
• In-hull/Trolling Motor-mounted with plastic housing
• Suitable for fiberglass hulls
• Ideal for outboards and I/O vessels up to 8 m (25 ft) in length
• Recommended for use with the SonarHub sounder module, Simrad NSS evo2 & NSS sport multifunction displays

83/200kHz Ice Transducer

STRUCTURE SCAN HD BRONZE THRUHULL PAIR

Product details

Bronze StructureScan™ HD Sonar thru-hull transducer. (pair)

StructureScan HD Plastic Thru-Hull

Plastic StructureScan™ HD thru-hull transducer

SonarHub Module

Compatible with the complete line of Simrad NSS Sport, NSE Expert and NSO Offshore multifunction displays, the plug-and-play network solution makes it easier than ever to identify productive fishing areas with connectivity to the latest Simrad sonar technologies – including StructureScan® HD and CHIRP.

Product details

The compact SonarHub™ module provides an all-in-one solution for adding StructureScan® HD and CHIRP sonar capabilities to Simrad NS multifunction displays.

Compatible with the complete line of Simrad multifunction displays, the plug-and-play network solution makes it easier than ever to identify productive fishing areas with connectivity to the latest Simrad sonar technologies – including StructureScan® HD and CHIRP.

The innovative SonarHub module features three built-in Ethernet ports for quick and convenient networking without the need for an extra Ethernet networking module.

Compatible transducers from Simrad Yachting and AIRMAR are sold separately.

Key Features

• Compact all-in-one sonar module delivers StructureScan® HD and CHIRP sonar technologies.
• CHIRP sonar with AIRMAR® TM150M transducer delivers extremely efficient pulse generation that provides improved target resolution and noise rejection, as well as wide coverage for perfect arches that clearly identify fish targets
• StructureScan® HD offers best-in-class, side-scanning range and resolution, plus DownScan Imaging™ to provide crystal-clear, picture-like views of what’s beneath a boat.
• Optional transducers include AIRMAR® TM150M, single-channel CHIRP transducer and existing StructureScan HD transducers.
• Plug-and-play compatibility with Simrad NS Series multifunction displays.
• Three built-in Ethernet ports allow for quick and convenient networking without the need for an extra Ethernet networking module

xSonic SS175H-W/20 Chirp Transducer 20° 1kW Tilted Element

This single-channel transducer high frequency CHIRP thru-hull transducer transmits across the 130-210 kHz bandwidth, providing bottom detection down to 1,000 ft. The SS175H-W provides excellent target separation, making it easy distinguish baitfish from game fish and structure. The 20° tilt is ideal for boats with a 20° to 24° hull deadrise. Ideal for boats up to 10m (35ft) in length.

Key Features

• Black 9 pin connector
• Cable length 10 m (33.0 ft)

Specifications

xSonic SS175L 12° Tilt Thru-Hull Low CHIRP Transducer

XSONIC SS175L 12 degree Low CHIRP through hull transducer

Product details

Low frequency CHIRP (below 80 kHz) is used in deep water over 600′, offers amazing depth performance (up to 10,000′) and marks targets at all depths in the water column

Key Features

• 12 degree tilt, low CHIRP through hull transducer
• Black 9 pin connector
• Cable length 10 m (33.0 ft)

Specifications

xSonic CM275LH-W Tank-Mounted Low/High CHIRP Transducer

Urethane, tank-mounted CHIRP transducer, ideal for sportfishing and commercial vessels 8 m (25 ft) and up.

Product details

• Dual-channel CHIRP
• Tank Mounted
• Ideal for boats 8m (25ft)
• Low CHIRP frequencies to accurately track the bottom in deep water
• High CHIRP frequenciesfor the best resolution and coverage in shallower depths

Specifications

xSonic SS175L Thru-Hull Low CHIRP Transducer 0° Tilt

XSONIC SS175L 0 degree Low CHIRP through hull transducer.

Product details

Low frequency CHIRP (below 80 kHz) is used in deep water over 600′, offers amazing depth performance (up to 10,000′) and marks targets at all depths in the water column

Key Features

• 0 degree tilt, low CHIRP through hull transducer
• Black 9 pin connector
• Cable length 10 m (33.0 ft)

Specifications

XSONIC AIRMAR B285M

Specifications

XSONIC AIRMAR SS175H-W 0 DEG

Specifications

StructureScan 3D Thru-Hull Transducer

This thru-hull transducer works with the StructureScan® 3D module (sold separately) to create a high resolution, three dimensional view of underwater terrain and fish-holding structure. The stainless steel transducer can be mounted flat or with the included fairing.

Product details

This thru-hull transducer works with the StructureScan® 3D module (sold separately) to create a high resolution, three dimensional view of underwater terrain and fish-holding structure. Immediately see where fish and structure are located in relation to your boat, with a picture-like view you can easily pan, tilt, and rotate for the perfect perspective. The stainless steel transducer can be mounted flat, or with the included fairing block. Hulls with a steep or dynamic deadrise may require our dual thru-hull transducer kit (sold separately), which includes separate port and starboard transducers to ensure wide-angle coverage to both sides of the hull.

Key Features

• StructureScan® 3D imaging transducer
• Scans up to 180 metres (600 feet) to each side of your boat
• Stainless steel transducer supports through-hull mounting
• Mount flat or with the included fairing block

StructureScan 3D & Low/High CHIRP Transducer

This multi-purpose transducer combines StructureScan® 3D imaging with low/high-frequency CHIRP and traditional sonar capabilities. Search underwater terrain for fish-holding structure in 3D, while pinpointing individual fish targets with CHIRP sonar. Low-frequency CHIRP offers excellent bottom tracking, while High CHIRP provides detailed coverage in shallower waters.

Product details

StructureScan® 3D Imaging
This thru-hull transducer works with the StructureScan® 3D module (sold separately) to create a high resolution, three dimensional view of underwater terrain and fish-holding structure. Immediately see where fish and structure are located in relation to your boat, with a picture-like view you can easily pan, tilt, and rotate for the perfect perspective.

CHIRP and Traditional Sonar
The transducer can also be connected directly to the built-in sounder on your Simrad multifunction display, or to a SonarHub sounder module, to provide CHIRP and traditional sonar capabilities. Low-frequency CHIRP offers excellent offshore bottom tracking, while High CHIRP provides detailed coverage of the upper water column and in shallower waters.

Through-Hull Installation
The through-hull transducer can be mounted flat, or with the included fairing block. Stainless steel construction suits a variety of hull materials and designs.

Key Features

• StructureScan® 3D imaging transducer
• Scans up to 180 metres (600 feet) to each side of your boat
• Also provides Low and High-frequency CHIRP sonar capabilities
• Stainless steel transducer supports through-hull mounting
• Mount flat or with the included fairing block

Specifications

Stainless Steel StructureScan HD Thru-Hull Transducer Pair with Y Cable

Stainless Steel StructureScan HD Thru-Hull Transducer Pair with Y Cable

Product details

As with transom-mount LSS-2 StructureScan HD transducers, these thru-hull Stainless steel transducers deliver extreme target detail, bottom discrimination and bait and game fish separation at depths down to 300ft and a wider range of up to 600ft side-to-side coverage. All StructureScan HD transducers are packed with an enhanced dual-frequency element array that operates at 455 kHz and 800 kHz. These transducers include a high-performance fairing that will give you Structure performance at speeds up to 35 mph, feature a 30ft transducer cable, plus a Y Cable that allows them to be connected to a single StructureScan HD module for simultaneous use.

XSONIC Airmar B275H-W

Specifications

XSONIC Airmar TM275LH-W

Urethane, Transom-mounted, 42-65 kHz/150-250 kHz Dual Channel CHIRP transducer (Wide Angle): Dual Black 9 pin connectors: Cable length 10 m (33.0 ft)

Product details

Specifications

StructureScan HD Skimmer Transducer

he StructureScan HD transducer features SideScan and DownScan Imaging™, supports 455 kHz and 800 kHz sonar frequencies and offers multiple mounting options.

StructureScan 3D & Med/High CHIRP Transducer

This multi-purpose transducer combines StructureScan® 3D imaging with medium/high-frequency CHIRP and traditional sonar capabilities. Search underwater terrain for fish-holding structure in 3D, while pinpointing individual fish targets with CHIRP sonar. A combination of Medium and High-frequency CHIRP offers detailed coverage and accurate bottom tracking in shallow to mid-water depths.

Product details

StructureScan® 3D Imaging
This thru-hull transducer works with the StructureScan® 3D module (sold separately) to create a high resolution, three dimensional view of underwater terrain and fish-holding structure. Immediately see where fish and structure are located in relation to your boat, with a picture-like view you can easily pan, tilt, and rotate for the perfect perspective.

CHIRP and Traditional Sonar
The transducer can also be connected directly to the built-in sounder on your Simrad multifunction display, or to a SonarHub sounder module, to provide CHIRP and traditional sonar capabilities. A combination of Medium and High-frequency CHIRP offers detailed coverage and accurate bottom tracking in shallow to mid-water depths.

Through-Hull Installation
The through-hull transducer can be mounted flat, or with the included fairing block. Stainless steel construction suits a variety of hull materials and designs.

Must Have: StructureScan 3D imaging requires a StructureScan 3D module (sold separately) and Simrad NSS evo3/evo2 or NSO evo3/evo2 multifunction display. CHIRP and traditional sonar features require the CHIRP sonar port on an NSS evo3/evo2 multifunction display or SonarHub sounder module.

Key Features

• StructureScan® 3D imaging transducer
• Scans up to 180 metres (600 feet) to each side of your boat
• Also provides Medium and High-frequency CHIRP sonar capabilities
• Stainless steel transducer supports through-hull mounting
• Mount flat or with the included fairing block

TotalScan Skimmer Med/High 455/800

Product details

An all-in-one transducer, TotalScan™ matches proven Broadband and CHIRP sonar with StructureScan HD and DownScan Imaging™ technology, making it possible to target fish and search for fish-holding structure with the same transducer. The TotalScan™ transducer features multiple mounting options.

Key Features

• All-in-one transducer featuring Broadband, CHIRP, StructureScan HD and DownScan Imaging™
• Supports 83/200kHz Broadband sonar frequencies
• Supports Medium and High CHIRP frequencies
• Supports 455/800kHz StructureScan frequencies
• Multiple mounting options

XSONIC AIRMAR CM599LH-W

CM599LH-W AIRMAR Chestmount

Key Features

• Dual Black 9 pin connector
• Cable length 10 m (33.0 ft)

XSONIC AIRMAR CM599LH-W

CM599LH-W AIRMAR Chestmount

Key Features

• Dual Black 9 pin connector
• Cable length 10 m (33.0 ft)

XSONIC AIRMAR CM599LH-W

These stainless steel thru-hull transducers work with the StructureScan® 3D module (sold separately) to create a high resolution, three dimensional view of underwater terrain and fish-holding structure. Separate port and starboard transducers deliver optimal coverage for hulls with a steep or dynamic deadrise.

Product details

These thru-hull transducers works with the StructureScan® 3D module (sold separately) to create a high resolution, three dimensional view of underwater terrain and fish-holding structure. Immediately see where fish and structure are located in relation to your boat, with a picture-like view you can easily pan, tilt, and rotate for the perfect perspective. Separate port and starboard transducers deliver optimal coverage for hulls with a steep or dynamic deadrise. The stainless steel transducers can be mounted flat, or with the included fairing blocks.

Key Features

• StructureScan® 3D imaging transducer
• Scans up to 180 metres (600 feet) to each side of your boat
• Stainless steel transducers support through-hull mounting
• Includes separate port and starboard transducers
• Mount flat or with the included fairing blocks

XSONIC AIRMAR B275LH-W

Bronze, Thru-Hull, 42-65 kHz/150-250 kHz Dual Channel CHIRP transducer (Wide Angle)

Product details

The B275LH-W is a bronze, thru-hull CHIRP transducer, ideal for sportfishing and commercial vessels 25ft and up. This dual-channel transducer combines Low CHIRP frequencies to accurately track the bottom in deep water, with High CHIRP at a constant 25° beam width for the best resolution and coverage in the upper water column and in shallower depths.

S5100 Sounder with CHIRP

The S5100 features three fully independent channels able to deliver high-resolution CHIRP sonar coverage across multiple depth ranges. Mix and match up to three transducers to provide the perfect coverage for any fishing style. Detect small or tightly grouped fish, identify thermoclines, and target specific depths with ease.

Product details

Up to Three Transducers for Ultimate Visibility
The S5100 is our first sounder module to feature three fully independent sonar channels, delivering true simultaneous coverage of up to three different depth ranges with uncompromising performance at every range. Connect three single-channel transducers, or pair one dual-channel and one single-channel, to create the perfect sonar coverage for the areas you fish and the species you target. Because all three sonar channels are completely independent, different frequency ranges can be viewed simultaneously a split-screen layout on a single display.

Sharper Target Resolution, Wider Coverage
CHIRP technology uses frequency-swept pulses to provide improved target resolution and noise rejection compared to traditional single-frequency sonar. With the S5100’s advanced CHIRP technology, you’ll see clear to the bottom with no mid-water noise or clutter. The S5100 is also compatible with Airmar’s wide‐angle CHIRP transducers; these deliver enhanced coverage of the upper water column, and are a perfect fit for targeting pelagic species. Wide-angle transducers are also useful in shallow water, where traditional narrow beam angles can provide limited bottom coverage. A wider coverage area not only speeds your search, but means individual fish targets are easier to see.

Plug-and-Play Display Compatibility
The S5100 can be used to add sonar capabilities to a modular Simrad display system, or to provide additional sonar capabilities on multifunction displays or fish finders with built-in sounder technology. High-speed Ethernet connectivity enables easy installation almost anywhere on board, on vessels of any size.

Key Features

• Three fully independent sonar channels
• High-resolution, noise-free clarity at all depth ranges
• Combine any three CHIRP frequency ranges to target multiple depths
• Compatible with wide-angle transducers for greater coverage
• Simultaneous split-screen viewing of multiple depth ranges
• Maximum depth of 3,000 metres / 10,000 feet (transducer dependent)
• Plug-and-play 9-pin transducer connectors for easy installation

xSONIC Airmar PM275LH-W

Product details

The PM275LH-W is a pocket or keel-mounted CHIRP transducer, ideal for sportfishing vessels 8 m (25 ft) and up. This dual-channel transducer combines Low CHIRP frequencies to accurately track the bottom in deep water, with High CHIRP at a constant 25° beam width for the best resolution and coverage in the upper water column and in shallower depths.

Key Features

• Dual Black 9 pin connectors
• Cable length 10 m (33.0 ft)

xSonic Airmar Stainless Steel 175M 0° Tilt

Stainless Steel 0° Tilt Medium frequency CHIRP transducer suitable for through hull mounting

Product details

The SS175M is a stainless steel, thru-hull CHIRP transducer, ideal for sportfishing and commercial vessels up to 8m (25ft) in length. This single-channel transducer offers Medium CHIRP for a balance between the great depth penetration of Low CHIRP, and the superior target resolution of High CHIRP.

Key Features

• Through hull flush mount transducer
• Black 9 pin connector
• Stainless Steel
• 85KHz – 135kHz medium CHIRP
• Cable length 10 m (33.0 ft)

Specifications

xSonic Airmar Stainless Steel 175M 20° Tilt

Stainless Steel 20° Tilt Medium frequency CHIRP transducer suitable for through hull mounting

Product details

The SS175M is a stainless steel, thru-hull CHIRP transducer, ideal for sportfishing and commercial vessels up to 8m (25ft) in length. This single-channel transducer offers Medium CHIRP for a balance between the great depth penetration of Low CHIRP, and the superior target resolution of High CHIRP.

Key Features

• 20 degree, low CHIRP through hull flush mount transducer
• Black 9 pin connector
• Stainless Steel
• 85KHz – 135kHz medium CHIRP
• Cable length 10 m (33.0 ft)

Specifications

xSonic Airmar Stainless Steel 175M 12° Tilt

Stainless Steel 12° Tilt Medium frequency CHIRP transducer suitable for through hull mounting

Product details

The SS175M is a stainless steel, thru-hull CHIRP transducer, ideal for sportfishing and commercial vessels up to 8m (25ft) in length. This single-channel transducer offers Medium CHIRP for a balance between the great depth penetration of Low CHIRP, and the superior target resolution of High CHIRP.

Key Features

• 12 degree, low CHIRP through hull flush mount transducer
• Black 9 pin connector
• Stainless Steel
• 85KHz – 135kHz medium CHIRP
• Cable length 10 m (33.0 ft)

StructureScan HD Stainless Steel Transducer

Product details

The StructureScan HD Thru-Hull Stainless steel versions deliver extreme target detail, bottom discrimination and bait and game fish separation at depths to 300ft and a wider range of 600ft side-to-side coverage. All StructureScan HD transducers are packed with an enhanced dual-frequency element array that operates at 455 kHz and 800 kHz. These transducers include a high-performance fairing that will give you Structure performance at speeds up to 35 mph and feature a 30ft transducer cable.

Key Features

• StructureScan HD single Stainless Steel Thru-hull with high speed fairing block
• Elements for SideScan (left and right) as well as DownScan
• Flat mount or cut fairing block only

xSonic Airmar SS75M 20°

Stainless Steel, Thru-hull, 80-130 kHz Single Channel CHIRP transducer (20° Tilt)

Product details

The SS75M is a stainless steel, thru-hull CHIRP transducer, ideal for sportfishing and commercial vessels up to 25ft in length. This single-channel transducer offers Medium CHIRP for a balance between the great depth penetration of Low CHIRP, and the superior target resolution of High CHIRP.

Specifications

Totalscan Transducer M/H Thruhull Single

Specifications

ForwardScan Transducer with Sleeve and Plug

Know what lies ahead with ForwardScan. This compact transducer provides a forward-looking view of up to eight times your current depth, allowing you to navigate shallow or poorly-charted waters with confidence. Includes a standard ForwardScan transducer, stainless steel sleeve, and blanking plug.

Product Details

Know What Lies Ahead
ForwardScan uses forward-looking sonar to give you a clear view of the bottom ahead of your boat. This award-winning technology is a powerful defence against running aground in shallow, unfamiliar, or poorly-charted waters. ForwardScan generally offers a forward view of 4-5 times your current depth; for example in 3 metres (10 feet) of water, see the bottom 12-15 metres (40-50 feet) ahead. Under ideal conditions ForwardScan can see even further, looking ahead up to 8 times your current depth. The 180 kHz ForwardScan transducer is designed to minimise interference from common 200 kHz transducers, enabling it to be used alongside existing fish-finding or depth-tracking sonar.

Simple 2D View and Chart Overlay
See a simple, immediately understandable view of the bottom ahead. Bottom Colour Tracking shows the bottom as a solid terrain in an uncluttered, side-on picture. For more detail, you can choose to display sonar returns from throughout the water column; these can illustrate other potential hazards such as dock posts. Perfect for cruising, you can also overlay ForwardScan depth data on charts: Heading Line View uses colour-coded segments to represent deep, medium, and shallow water ahead. Depths are customisable to suit your boat’s draught, and a shallow depth alarm helps to ensure you’re never caught unaware.

Easy Installation and Maintenance
ForwardScan suits almost any vessel and hull type, thanks to its stainless steel through-hull mounting sleeve. The sleeve and included fairing block can accommodate 29 mm (1.15 inch) thick hulls at 12 degrees deadrise, or 19 mm (3/4 inch) hulls at 20 degrees. A self-closing valve means the ForwardScan transducer can be inserted and removed from the sleeve while on the water, allowing quick and easy transducer maintenance.

Key Features

• Simple 2D view of the bottom ahead
• Navigate safely with ForwardScan data overlaid on charts
• Look ahead up to 8 times your current depth (generally 4-5 times)
• Designed to minimize interference from existing 200 kHz transducers
• Built-in water temperature sensor offers extra value
• Easy installation and maintenance with an on-water removable transducer
• Connects to the StructureScan® HD port on compatible displays or sounder modules

XSonic Airmar SS75H Transducer 0° Tilt

The SS75H is a Stainless Steel, thru-hull, non-tilted, high-frequency (130-210kHz), depth and temperature transducer.

Product Details

Perfect for smaller boats up to 8m (25ft), this stainless steel through hull mounted CHIRP transducer enables bottom detection down to 3,000m with great detail and resolution. This tramsducer makes it possible to distinguish between individual baitfish, game fish and underwater structures.

Key Features

• Calculates how deep the water is
• Temperature sensor for accurate water temperature readings.
• CHIRP range is 130kHz-210kHz for good target detail in shallow water and excellent bottom tracking in deep water.
• The low profile housing minimizes drag with just 5mm extending outside of the hull.
• The 0° tilt is ideal for boats with a 0° to 14° hull deadrise

TotalScan L/H Thru Hull Single Transducer

TotalScan thru hull transducer with Low and High CHIRP

Product Details

TotalScan thru hull transducer with Low and High CHIRP. Single transducer for flat to hull mounting or fits deadrises up to 5 degrees with fairing block.

The TotalScan™ Transducer allows anglers to access Medium CHIRP, High CHIRP, DownScan™ Imaging and StructureScan™ using only a single transducer.

Key Features

• All-in-one transducer featuring Broadband, CHIRP, StructureScan HD and DownScan Imaging™
• Supports 50/200kHz Broadband sonar frequencies
• Supports Low and High CHIRP frequencies
• Supports 455/800kHz StructureScan® frequencies
• Supports Water Temperature
• Fairing block is included in the box

AIRMAR IDST800L 235F B-122-RETR 6m

AIRMAR IDST800L 235F B-122-RETR 6M

StructureScan 3D Module

The StructureScan® 3D module works with any of our StructureScan 3D transducers to create a high resolution, three dimensional view beneath the surface. Immediately see where fish and structure are located in relation to your boat, with a picture-like view you can easily pan, tilt, and rotate for the perfect perspective.

Product details

Explore Fish-Holding Structure in 3D
StructureScan 3D takes the guesswork out of interpreting bottom details, letting you see underwater terrain and fish-holding structure as it really is. Explore beneath your boat from easy pre-set viewpoints, or take total control to pan, tilt, and rotate your view for the perfect underwater perspective. Customise your view to highlight suspended fish targets, emphasise bottom contours, and apply other enhancements to help you find the fish or structure you’re searching for.

Super-Wide, High Definition Scanning
The StructureScan 3D module and transducer offer super-wide SideScan sonar coverage, reaching up to 180 metres (600 feet) to each side of your boat. High-definition scanning delivers detailed 3D imagery, plus enhanced performance in classic SideScan and DownScan Imaging™ views. Combine 3D imagery with these enhanced StructureScan® HD views to gain new insights and search fishing areas more effectively.

Easy Upgrade or New Install
The StructureScan 3D module offers plug-and-play connection to compatible transducers (sold separately), and to any compatible Simrad multifunction display. Three built-in Ethernet ports make it easy to share sonar capabilities across multiple displays, or to connect other networked accessories. Choose from a range of transducers including transom-mount and thru-hull options, separate port and starboard transducers for hulls with a steep or dynamic deadrise, and multi-purpose transducers combining StructureScan 3D with CHIRP and traditional sonar.

Key Features

• Explore underwater terrain and fish-holding structure in 3D
• Instant results with easy pre-set viewpoints
• Pan, tilt, and rotate for the perfect perspective
• Super-wide, high definition scanning delivers new insights
• Combine 3D with classic SideScan and DownScan Imaging™ views
• Easy plug-and-play upgrade or install
• Choose from a range of transducer options to suit your boat

B744V W/N2K SPEED/TEMP

Product details

The B744V is a smart and compact, bronze, thru-hull, 50/200 kHz multisensor that offers depth and NMEA2000 Speed and temperature data. Ideal for use with our Sonarhub, Simrad echosounder for fishing in shallow to medium depths of water.

Key Features

Depth/Speed/Temperature

• One sensor does it all – an extremely cost effective option due to the requirement for just one hole in the hull.

Smart Speed/Temp

• The removable smart speed/temp insert allows NMEA2000 to be sent directly from the transducer to other instruments.

Wide Operating Range

• From 1 knot to 45 knots.

Highly Accurate Sounding

• Provides extremely accurate echosounding data, even at speeds of over 30 knots.

Dual Frequency

• Works at 50 kHz and 200 kHz for good target detail in shallow water and excellent bottom tracking in deep water.

Bronze

• Built to withstand the environment.

Innovative Housing

• Fully recessed into its custom high-performance fairing. Also, If there is a need to remove the transducer, the self-closing valve minimises water flow into the boat.

600 W RMS

• Ideal for 600 W fishfinders.

XSONIC Airmar SS75M Transducer 0° Tilt

The SS75M is a bronze, thru-hull, non-tilted, medium-frequency (80-130kHz), depth and temperature transducer. The ceramic element is tilted for built-in deadrise compensation, giving excellent echo returns for more accurate depth readings.

Key Features

CHIRP

• CHIRP transducers enable bottom detection with 5 to 10 times greater detail and resolution so precise it’s possible to distinguish between individual baitfish, game fish, and underwater structures.

Depth/Temperature

• Calculates how deep the water is, so that you can avoid running aground, whilst also incorporating a temperature sensor for accurate water temperature readings.

Easy To Install

Medium Frequency

• CHIRP range is 80kHz-130kHz for good target detail in shallow water and excellent bottom tracking in deep water.

Highly Accurate

• Provides extremely accurate data.

0° Tilt

• The 0° tilt is ideal for boats with a 0° to 14° hull deadrise.

Low Profile

• The low profile housing minimizes drag with just 5mm extending outside of the hull.

Plug & Play Connection

• Easily connect to Simrad NSSevo3 or Lowrance HDS Gen3

Specifications

xSonic Airmar B258

The B258 is a bronze, 1kW RMS, thru-hull, 50/200 kHz depth and temperature sensor. Ideal for use with our BSM-1 echosounder for fishing in shallow, medium and deep waters.

Key Features

High Performance

• The 1kW transducer is perfect for fast, sportfishing vessels that can install a thru-hull transducer with a fairing.

Deep Water Fishing

• Excellent for deep water bottom and structure fishing up to 500m/1640ft.

Depth/Temperature

• Calculate depth and temperature from one compact sensor.

Easy To Install

Wide Operating Range

• From 1 knot to 45 knots.

Highly Accurate Sounding

• Provides extremely accurate echosounding data, even at speeds of over 30 knots.

Dual Frequency

• Works at 50 kHz and 200 kHz for good target detail in shallow water and excellent bottom tracking in deep water.

Bronze

• Built to withstand the environment.

Specifications

XSONIC AIRMAR SS260

Stainless Steel, Thru-Hull 50/200 kHz Broadband Transducer

Product details

The SS260 is a stainless steel, thru-hull broadband transducer, ideal for sportfishing and commercial vessels up to 30ft in length, fishing in depths down to 3000ft.

Key Features

High Performance

• The 1kW transducer is perfect for fast, sportfishing vessels that can install a thru-hull transducer with a fairing.

Deep Water Fishing

• Excellent for deep water bottom and structure fishing up to 500m/1640ft.

Depth/Temperature

• Calculate depth and temperature from one compact sensor.

Easy To Install

Wide Operating Range

• From 1 knot to 45 knots.

Highly Accurate Sounding

• Provides extremely accurate echosounding data, even at speeds of over 30 knots.

Dual Elements

• The narrow, 6° beam 200 kHz ceramic offers excellent resolution and and crisp image detail for bottom fishing. The seven-element 50 kHz array has a wider 19° beam for deepr blue-water fishing.

Stainless Steel

• Built to withstand the environment.

Specifications