IR31 NMEA Dimmer

•  2 channel NMEA Dimmer
• Pulse Dimmer
• Auto Light detection
• DDC or proprietary message
• For all SKIPPER products

This is a new NMEA and pulse dimmer unit that can be used to give a central dimming command. DDC. Either as a 4 level theme command, or as a 10 level command with theme and brightness. In addition the switch has an internal or external light sensor, and can be made to dim automatically. If you have special dimming commands these can be programmed into the system using the skipper service software, and this can be sent out of 1 of the 2 outputs. Dimming levels can also be pre-programmed or adjusted using the dimmer buttons. The system has 2 inputs and 2 outputs and the dimming commands can be multiplexed on to the incoming NMEA commands.

Specifications

NE108-SA

• NMEA0183 Expander
• 1 input
• 8 outputs
• Approved according to IEC60945
• For 35mm DIN-Rail mounting

The NE108-SA is a galvanic isolated NMEA0183 Expander with 1 input and 8 outputs.

Features

• 1 input
• 8 outputs
• Input power 24VDC
• Dimensions: Width 77mm – Length 128mm – Depth 50mm

ETT985

• Transducer tester
• Echo Sounder tester
•  NMEA tester
• Built-in rechargeable battery

A simple to use, reliable and accurate tester for most Echo Sounders. Preprogrammed with factory tests for Transducers, Echo Sounders and NMEA ports.

This unit can be used in a stand-alone mode, or using a connection to a PC to give accurate results and even print/save a status report, this unit eliminates uncertainty of whether a failure is in the Transducer or in the Echo Sounder. An expensive mistake if you get it wrong!

Features:

Tester for Transducer of frequencies from 10 kHz to 1 MHz

Just the tester:

• Impedance, resistance and phase
• Detection of resonant point and impedance at resonance
• Preprogrammed integrity tests for SKIPPER transducers (and others)

With software AC-ETT985:

• Graph of impedance, conductance, phase and susceptance
• Detection of resonance, anti-resonance, bandwidth and factory limit check
• Save to .xls format and/or print out for service reports
• Add your own transducer checks and limits (saved in tester for later use)

Simulator for SKIPPER and other continuous wave Echo Sounders

Just the tester:

• Detect and measure pulses, frequency, strength, Vpp, width and period
• Generate return pulses with fixed or tracking format, at depth up to 999.9 m
• Simulate fish in the water column

With software AC-ETT985:

• Check results against factory settings or preset default values
• Add your own Echo Sounder values and checks

NMEA tester

Just the tester:

• Monitor NMEA lines, loop back signals from devices, send standard formats for GPS, gyro, Echo Sounders, Speed Logs etc.
• Use the unit as a NMEA to RS232 converter or to USB with included converter

With software AC-ETT985:

• Insert your own NMEA parameters (can be saved)

Test the transducer against a preset set of parameters from the manufacturer. Then test the Echo Sounder and compare to an expected screen picture. This will test programmed limitations, noise levels, cabling and Transducer operation.

If the problem is NMEA connections, then simply connect the tester to the NMEA port, using the provided test clips, and monitor the traffic. Alternatively you can loop the incoming signals to the output, and see if the signals appear on the sounder unit. The unit will send standard messages for the Echo Sounder, GPS, gyro, Speed Log, and more. It will allow wiring to be diagnosed. If all else fails, or if you wish to send commands or log data, the ETT985 can be used together with a PC as a simple NMEA converter.

The ETT985 is provided with test cables, power supply and a USB converter, in a soft carry bag, ready to go! The tester can be purchased alone (part number: ETT985-SA) or with activation code (part number: ETT985-SASW) for the extra test functionality within the SKIPPER service software freely downloadable from www.skipper.no.

This system is ideal for anyone performing service on Echo Sounders or as a low cost analyser for anyone interested in underwater transducers.

JB12 Junction Box

Main Functions:

• A water resistant junction box for extending digital signal cables in speed logs.

Applications:

• EML224SX Log sensor – extension of sensor cable.
• EML224N-XX – extension of cable from JB60N2 to display unit.
• DL850T-XX – extension of cable from transceiver to display (not sensor cable)

Specifications

Transducer Selector TS-104

• Press button Channel selection
• LED – Display of selected channel (with dimming) Switch/Pulse synchronisation
• Switching of multiple single frequency transducers.
• For use on larger vessels, platforms etc.
• Two overlays as standard – Offshore Rig and Vessel

A 4 to 1 transducer switcher allowing the user to select which transducer is to be shown on a single channel echosounder. The unit allows up to 4 transducers of the same frequency to be switched onto a single channel.

Specifications

Anemometer

Ninglu AM706 Anemometer

High resolution wind speed (0.1 m/s) and direction (1 degree) Anemometer

Temperature Resistant and moisture proof mechanic design

7\\” high brightness LCD display

Specifications

ETNSTCI Ice Protected Combo Tank

• Ice Protected Combo Steel Tank
• DNV approval as standard
• Other approvals on request

The ETNSTCI is a Ice Protected Combo Steel Tank. It is designed for sensors made by SKIPPER Electronics, but could also be used for other sensors with special adaptors.

Specifications

ETNSLB 100 mm Gate Valve Single Bottom

• 100 mm Sea Valve
• Single Bottom Arrangement
• DNV approval as standard
• Other approvals on request

The ETNSLB is a 100 mm Sea Valve with Gate Valve operation for Single Bottom Arrangement. It is designed for sensors made by SKIPPER Electronics, but could also be used for other sensors with special adaptors.

Specifications

DB-100-SB 100 mm Ball Valve Double Bottom

• 100 mm Sea Valve
• Double Bottom Arrangement
• DNV approval as standard
• Other approvals on request

The DB-100-SB is a 100 mm Sea Valve with Ball Valve operation for Double Bottom Arrangement. It is designed for sensors made by SKIPPER Electronics, but could also be used for other sensors with special adaptors.

Specifications

SB-100-SB 100 mm Ball Valve Single Bottom

• 100 mm Sea Valve
• Single Bottom Arrangement
• DNV approval as standard
• Other approvals on request

The SB-100-SB is a 100 mm Sea Valve with Ball Valve operation for Single Bottom Arrangement. It is designed for sensors made by SKIPPER Electronics, but could also be used for other sensors with special adaptors.

Specifications

DB-100-SA 100 mm Gate Valve Single Bottom

• 100 mm Sea Valve
• Single Bottom Arrangement
• DNV approval as standard
• Other approvals on request

The SB-100-SA is a 100 mm Sea Valve with Gate Valve operation for Single Bottom Arrangement. It is designed for sensors made by SKIPPER Electronics, but could also be used for other sensors with special adaptors.

Specifications

DB-100-SA 100 mm Gate Valve Double Bottom

• 100 mm Sea Valve
• Double Bottom Arrangement
• DNV approval as standard
• Other approvals on request

The DB-100-SA is a 100 mm Sea Valve with Gate Valve operation for Double Bottom Arrangement. It is designed for sensors made by SKIPPER Electronics, but could also be used for other sensors with special adaptors.

Specifications

DB-60-SA 60 mm Ball Valve Double Bottom

• 60 mm Sea Valve
• Double Bottom Arrangement
• DNV approval as standard
• Other approvals on request

The DB-60-SA is a 60 mm Sea Valve with Ball Valve operation for Double Bottom Arrangement. It is designed for sensors made by SKIPPER Electronics, but could also be used for other sensors with special adaptors.

Specifications

SB-60-SA 60 mm Ball Valve Single Bottom

• 60 mm Sea Valve
• Single Bottom Arrangement
• DNV approval as standard
• Other approvals on request

The SB-60-SA is a 60 mm Sea Valve with Ball Valve operation for Single Bottom Arrangement. It is designed for sensors made by SKIPPER Electronics, but could also be used for other sensors with special adaptors.

Specifications

ETNSTCILF Ice Protected Low Frequency Combo Tank

• Ice Protected Combo Steel Tank
• DNV approval as standard
• Other approvals on request

The ETNSTCILF is a Ice Protected Low Frequency Combo Steel Tank. It is designed for sensors made by SKIPPER Electronics, but could also be used for other sensors with special adaptors.

Specifications

ETNSTCLF Low Frequency Combo Tank

• Low Frequency Combo Steel Tank
• DNV approval as standard
• Other approvals on request

The ETNSTCLF is a Low Frequency Combo Steel Tank. It is designed for sensors made by SKIPPER Electronics, but could also be used for other sensors with special adaptors.

Specifications

ETNSTCL Combo Tank

• Combo Steel Tank
• DNV approval as standard
• Other approvals on request

The ETNSTCL is a Combo Steel Tank. It is designed for sensors made by SKIPPER Electronics, but could also be used for other sensors with special adaptors.

Specifications

ETNST Combo Tank

• Combo Steel Tank
• DNV approval as standard
• Other approvals on request

The ETNSTC is a Combo Steel Tank. It is designed for sensors made by SKIPPER Electronics, but could also be used for other sensors with special adaptors.

Specifications

ETNST Standard Tank

• Standard Steel Tank
• DNV approval as standard
• Other approvals on request

The ETNST is a Standard Steel Tank. It is designed for sensors made by SKIPPER Electronics, but could also be used for other sensors with special adaptors.

Specifications

ETNALC Aluminium Combo Tank

• Combo Aluminium Tank
• Subject to local approval after installation

The ETNALC is an Aluminium Combo Tank. It is designed for sensors made by SKIPPER Electronics, but could also be used for other sensors with special adaptors.

Specifications

SB-200-SA 200 mm Gate Valve Single Bottom

• 200 mm Sea Valve
• Single Bottom Arrangement
• DNV approval as standard
• Other approvals on request

The SB-200-SA is a 200 mm Sea Valve with Gate Valve operation for Single Bottom Arrangement. It is designed for sensors made by SKIPPER Electronics, but could also be used for other sensors with special adaptors.

Specifications

TAIYO TD-L1550

• Synthesized VHF Automatic Digital Direction Finder
• 100 sets of channel with type of station can be memorised.
• Scan(100 channels) reception is available.
• Bearing display : 3 numerical LEDs in 10 steps
• Reception : Double super heterodyne with PLL synthesizer
• Frequency range
• International VHF band (for spot reception)
• U.S. weather channel or Scandinavian fishing channel
• Distress frequency : 121.5 MHz

Specifications

Ninglu FS117

• Dual frequency 50/200 kHz
• 7\” TFT, 480 x 234 pixels
• 50/200 kHz transducer included

Ninglu FS117 is a 7” colour LCD fishery Echo Sounder with two frequencies (50 and 200 kHz). It is possible to see one transducer in the full display or split the display to see both transducers.

FS117 is complete with a dual frequency transducer (50 and 200 kHz).

Specifications

Ninglu DF612

• Dual frequency 50/200 kHz
• 10,4\” LCD screen
• 50/200 kHz transducer included

Ninglu is a 10,4” colour LCD fishery Echo Sounder with two frequencies (50 and 200 kHz). It is possible to see one transducer in the full display or split the display to see both transducers.

DF612 is complete with a dual frequency transducer (50 and 200 kHz).

Specifications

SKIPPER ES675

• Dual frequency 50/200 kHz
• 6,5” LCD screen
• 50/200 kHz transducer included

Suzuki ES-675 is a 6,5” colour LCD fishery Echo Sounder with two frequencies (50 and 200 kHz). It is possible to see one transducer in the full display or split the display to see both transducers.

ES-675 is complete with a dual frequency transducer (50 and 200 kHz).

Specifications

SKIPPER ES1080FFS

• One frequency
• Flexible frequency system
• 10,4\” LCD screen

Specifications

SKIPPER ES2035B

• One frequency
• 1 kW
• 10,4\” LCD screen

Specifications

SKIPPER ES2035BF

• Dual frequency
• 1 kW
• 10,4\” LCD screen

Specifications

Suzuki S-1900 Sonar

• Optional display
• 80, 140 and 180 kHz frequency
• Search light or sector scan
• Designed to fit in small to mid-sized fishing vessels
• DSP technology

Specifications

Suzuki S-1400 Sonar

• 10.4\” colour LCD screen
• 220 kHz frequency
• Transceiver unit mounted in display unit
• Designed to fit in small to mid-sized fishing vessels
• Low-profile hull unit for space saving installation
• Lowest cost searchlight sonar

Specifications

ETF38A 38 kHz Transducer

SKIPPER 10×12° (Art no: ETF38A) 38khz/ 2,5kW External mount housing

The twenty-four piezoceramic element, sets the standard for excellent performance. The expoxy resin housing with integral acousting window achieves a balance of very low ringing, low sidelobes, and very excellent sensitivity.

Features

• Max power 2,5kW
• High echo amplitudes achieved with excellent transmitting and receiving voltage response
• Excellent ring suppression and very low Q provides for remarkable echo definition
• PZT piezoceramic array provides high acoustic efficiency
• Good definition in hard bottoms with low sidelobes
• Streamlined shape reduces drag

Specifications

• Housing material: cast urethane
• Standard cable type: C43-shielded twisted pair
• Standard cable length: 15 m (50\\’)
• Weight: 12 kg (13 lb.)
• Individually packaged
• Installation kit: stainless steel nuts & bolts with foam plugs
• Accommodates hull thickness: Max. no fairing 234 mm (9 i/4\\”) ax. with fairing157 mm (63/16\\”)

Applications

• Commercial fishing vessels
• Compatible with any hull material

Performance data

ETF50D 50 kHz Transducer

SKIPPER 10×16° (Art no: ETF50D) 50khz/ 2kW External mount housing

The thirteen- piezoceramic element, sets the standard for performance and price its class. The expoxy resin housing with integral acousting window achieves a balance of very low ringing, low sidelobes, and excellent sensitivity at a reasonable price. When used with our urethane fairing, the installation is simplified, and the fairing will not swell or rot.

Features

• High echo amplitudes achieved with excellent transmitting and receiving voltage response
• Excellent ring suppression and very low Q provides for remarkable echo definition
• PZT piezoceramic array provides high acoustic efficiency
• Good definition in hard bottoms with low sidelobes
• Streamlined shape reduces drag
• Blister housing minimizes installation cost

Specifications

• Housing material: cast urethane
• Standard cable type: C37-shielded twisted pair (2-18 AWG) with braided shield, black neoprene jacket, 9 mm (3/8\”) diameter
• Standard cable length: 15 m (50\’)
• Weight: 5,5 kg (13 lb.)
• Individually packaged
• Installation kit: stainless steel nuts & bolts with foam plugs
• Accommodates hull thickness: Max. no fairing 234 mm (9 i/4\”) ax. with fairing157 mm (63/16\”)

Applications

• Commercial fishing vessels
• Compatible with any hull material

Performance data

ETF38E 38 kHz Transducer

SKIPPER 11×19° (SKIPPER Item no. ETF38E) External mount housing

Excellent performance at 38 kHz is provided by a thirteen-element piezoceramic assembly mounted in a durable, SEALCAST, urethane housing. This design provides high source level capability, low sidelobes, low ringing, and maximum reliability. Used with our urethane fairing, the installation will be quicker, and the fairing will not swell or rot.

Features

• Very high source. level capability for good deep water performance
• Low sidelobe minimize spurious echoes
• Low ringing for good discrimination of fish targets
• Seamless SEALCAST urethane housing for long life underwater
• Streamlined shape reduces drag
• Blister housing minimizes installation cost.

Specifications

•  Housing material: cast urethane
• Standard cable type: C37-shielded twisted pair (2-18 AWG) with braided shield, black neoprene jacket, 9 mm (3/8\”) diameter
• Standard cable length: 15 m (50\’)
• Weight: 6 kg (13 lb.)
• Individually packaged
• Installation kit: stainless steel nuts & bolts with foam plugs
• Accommodates hull thickness: Max. no fairing 234 mm (9 i/4\”) M x. with fairing157 mm (63/16\”)

Applications

• Commercial fishing vessels
• Compatible with any hull material

Performance data

ZZL-01021 200 kHz Transducer

ZZL-01021 Transducer 200kHz, 25 m cable 8° circular

• Frequency: 200 kHz
• Material: Ceramic
• Angle: 8° Circular
• Cable Length: 25 m
• Max power: 1.5 kW
• Weight: 5 kg

ETF050BZC 50 kHz Transducer

ETF050BZC Transducer ceramic, 10m cable 50kHz 30° circular

• Frequency: 50 kHz
• Material: Ceramic
• Angle: 30° circular
• Cable length: 10 m
• Max power: 800 W
• Weight: 3 kg

Stuffing Tube

ZZL-01012 Transducer cable, stuffing tube bronze 4”

SKIPPER ESN200

• Navigation Echo Sounder
• Dual frequency
• Colour 9\” touch screen
• Auto Gain
• Auto TVG
• Auto Range
• Auto Power
• Wheelmark
• INS and IBS ready

The SKIPPER ESN200 is a navigation Echo Sounder with a black box and a 9\” touch display. The Echo Sounder graphics are continuously shown on the screen along with complete navigational details. Most of the functions are automatic, but it is also possible to run it in manual mode. The ESN200 is a dual frequency Echo Sounder.

Specifications

SKIPPER ESN100

• Navigation Echo Sounder
• Single frequency 50 or 200 kHz
• Colour 9\” touch screen
•  Auto Gain
• Auto TVG
• Auto Range
• Auto Power
• Wheelmark

The SKIPPER ESN100 is a navigation Echo Sounder with a black box and a 9\” touch display. The Echo Sounder graphics are continuously shown on the screen along with complete navigational details. Most of the functions are automatic, but it is also possible to run it in manual mode.

Specifications

SKIPPER GDS101

• Single frequency 38, 50 or 200 kHz
• Colour TFT LCD, with Day/night screen
• Data in/outputs and – Analog outputs.
• Possibility for external printer
• Low and high frequency
• More than 1 month depth recording depending on Compact Flash memory card

The SKIPPER GDS 101 is a navigation Echo Sounder with a large, high resolution colour LCD display. The Echo Sounder graphics are continuously shown on the LCD along with complete navigational details. External connectors are provided for printer, VGA and NMEA in/output.

Specifications

SKIPPER GDS102

• Dual Channel
• 10 – 250 kHz
• Colour TFT LCD, with Day/night screen
• Data in/outputs and – Analogue outputs.
• Possibility for external printer
• 24 hours depth recording

The SKIPPER GDS 102 is a dual channel navigation Echo Sounder with a large, high resolution colour LCD display. The Echo Sounder graphics are continuously shown on the LCD along with complete navigational details. External connectors are provided for printer, remote VGA and NMEA in/output.

Specifications

SKIPPER SD21

Speed over ground (SOG) Speed log with built in STW sensor

• Speed over ground (SOG) in three axis (Docking mode)
• Speed through water (STW) in one axis
• Colour 9\\” touch screen with day/night screens and Compact dot LED display
• NMEA 0183 output
• LAN
• GPS, GLONASS (SOG) and Doppler speed (STW)

The SKIPPER combined speed log SD21 is a three axis speed log and a one axis speed log providing both SOG and STW. It is providing longitudinal and fore/aft transversal ship speed over ground (SOG) in additional to longitudinal speed through water (STW). The SKIPPER combined speed log SD21 provides accurate navigation parameters measured as they happen, and presented in a logical, user friendly way.

Specifications

SKIPPER SATLOG SL1200

• Speed over ground (SOG) in three axis (Docking mode)
• Colour 9\” touch screen with day/night screens
• NMEA 0183 output
• GPS and GLONASS Speed

The SKIPPER SATLOG SL1200 is a three axis speed log. It is providing longitudinal and fore/aft transversal ship speed over ground (SOG). The SKIPPER SATLOG SL1200 provides accurate navigation parameters measured as they happen, and presented in a logical, user friendly way.

Specifications

SKIPPER DL21

• Dual Axis Doppler Speed Log
• Independent Single Axis Doppler Speed Log
• Water speed in single and dual axis (STW)
• Ground speed in dual axis (SOG)
• Docking functionality as standard (Three axis in STW and SOG)
• 9\” Touch Display
• Sea Temperature readout
• LAN and NMEA 0183 output
• User friendly programmable displays and integrated menus
• Fully automatic settings
• Resultant Sea Current in speed and direction

The SKIPPER DL21 is a Dual Axis Doppler Speed Log and a Single Axis Doppler Speed Log in one sensor unit. It is working on the doppler principle, providing longitudinal and transversal ship’s speed (STW and SOG) and distance relative to sea water. The SKIPPER DL21 gives accurate navigation parameters, measured as they happen, and presented in a logical, user friendly way.

The new DL21 Speed Log is designed for ships over 50.000 GT with simultaneous and independent measurement of speed through water and speed over ground. This is according to new IMO resolution MSC334(90).

Specifications

SKIPPER DL2

• Dual Axis Doppler Speed Log
• Water speed in dual axis (STW)
• Ground speed in dual axis (SOG)
• Docking functionality as standard (Three axis in STW and SOG)
• 9\” Touch Display
• Sea Temperature readout
• LAN and NMEA 0183 output
• User friendly programmable displays and integrated menus
• Fully automatic settings
• Resultant Sea Current in speed and direction

The SKIPPER DL2 is a Dual Axis Doppler Speed Log, working on the doppler principle, providing longitudinal and transversal ship’s speed (STW and SOG) and distance relative to sea water. The SKIPPER DL2 gives accurate navigation parameters, measured as they happen, and presented in a logical, user friendly way.

Specifications

SKIPPER DL1 Multi

• Single Axis Doppler Speed Log
• Water Speed in Single Axis
• Compact Display in 28 x 30 LED dot matrix with full night dimming
• Sea temperature
• LAN and NMEA 0183 output
• 3 user friendly programmable displays and integrated menus
• Fully automatic settings

The SKIPPER DL1 Multi is a Single Axis Doppler Speed Log, working on the doppler principle, providing longitudinal ship’s speed (STW) and distance relative to sea water. The SKIPPER DL1 Multi gives accurate navigation parameters measured as they happen and presented in a logical, user friendly way.

Specifications

SKIPPER DL1

• Single Axis Doppler Speed Log
• Water speed (STW) in Single Axis
• Display in 28 x 30 LED dot matrix with full night dimming
• Sea Temperature readout
• NMEA 0183 output
• 3 userfriendly programmable displays and integrated menus
• Fully automatic settings

The SKIPPER DL1 is a Single Axis Speed Log, working on the doppler principle, providing longitudinal ship’s speed (STW) and distance relative to sea water. The SKIPPER DL1 gives accurate navigation parameters, measured as they happen, and presented in a logical, user friendly way.

Specifications

SKIPPER 50/200 kHz Dual Transducers

• 50 and 200 kHz Dual Navigational Transducer
• Different adaptors to different bottom arrangement
• Optional cable length (25 and 50 m)

Specifications

SKIPPER 38 kHz Transducers

• 38 kHz Navigational Transducer
• Different adaptors to different bottom arrangement
• Cable length 40 m
• Range 1 500 m

Specifications

SKIPPER 24 kHz Transducers

• 24 kHz Navigational Transducer
• Different adaptors to different bottom arrangement
• Cable length 40 m
• Range 4 000 m

Specifications

SKIPPER 50 kHz Transducers

• 50 kHz Navigational Transducer
• Different adaptors to different bottom arrangement
• Optional cable length (25 and 40 m)
• Range 750 m

Specifications

Compact Multi Repeater CD401MR-SB

• Depth below surface, keel and transducer
• Speed over ground and through water
• Distance, total/trip for both ground and water
• Heading, true, magnetic and relative
• Rotation, rate of turn and direction
• Wind speed and direction (true, magnetic and relative)
• Temperature in water and air
• Drive, RPM, propeller pitch and rudder position
• Clock UTC, local time and expected time of arrival
• Current, direction and speed

The SKIPPER CD401MR is a remote multirepeater for NMEA signals. It is designed for use with SKIPPER products together with products from other manufacturers, when these have an NMEA 0183 output.

Specifications

DGR360 Digital Gyro Repeater

• Heading angle
• Visual indication of rotation speed
• HDT/THS/HDM signals
• Bracket or panel mounting

DGR 360 is a digital gyro repeater that displays the Heading Angle in the LED segment display and indicates the Direction of Turn with 30 dual-color surrounding LED’s, changing from green to red colour depending on the direction of turn.

Specifications

Digital Depth indicator SKIPPER IR301

• Depth indication
• Alarms
• Shows position of transducer in use
• Bracket or panel mounting

The SKIPPER IR 301 is a remote depth indicator using NMEA signals. It gives accurate digital depth indication based on signals from the SKIPPER ED165, GDS101 or GDS102 Echo Sounders. SKIPPER IR 301 can also be used with Echo Sounders from other manufacturers, when these have NMEA 0183 output.

Specifications

Digital Speed Indicator SKIPPER IR300

• Speed indicator
• Alarms – Speed alarm
• Trip counter
• Distance counter
• One, two or three axis indication
• Bracket or panel mounting

The SKIPPER IR300 is a remote speed indicator for NMEA signals. It is designed for use with SKIPPER DL850 and EML224. It may also be used with Speed Logs from other manufacturers, when these have an NMEA 0183 output.

Specifications

SKIPPER GDS101S

• Single frequency 38, 50 or 200 kHz
• Color TFT LCD, with Day/night screen
• Data in/outputs and – Analog outputs.
• Possibility for external printer
• Low and high frequency
• 24 hours depth recording
• CUSTOMIZED VERSION!

Specifications

SKIPPER GDS102S

• Dual Channel
• 10 – 250 kHz
• Color TFT LCD, with Day/night screen
• Data in/outputs and – Analogue outputs.
• Possibility for external printer
• 24 hours depth recording
• CUSTOMIZED VERSION!

Specifications