IR31 NMEA Dimmer
IR31 NMEA Dimmer
- 2 channel NMEA Dimmer
- Pulse Dimmer
- Auto Light detection
- DDC or proprietary message
- For all SKIPPER products
This is a new NMEA and pulse dimmer unit that can be used to give a central dimming command. DDC. Either as a 4 level theme command, or as a 10 level command with theme and brightness. In addition the switch has an internal or external light sensor, and can be made to dim automatically. If you have special dimming commands these can be programmed into the system using the skipper service software, and this can be sent out of 1 of the 2 outputs. Dimming levels can also be pre-programmed or adjusted using the dimmer buttons. The system has 2 inputs and 2 outputs and the dimming commands can be multiplexed on to the incoming NMEA commands.
Specifications
| Part Number | IR31DIM-SA |
| To be used with | All SKIPPER products, all products accepting NMEA dimming messages |
| Input Voltage | 24 V DC (18-32V) |
| Interface unit IP rating | IP 56 on front (IP22 otherwise) |
| Approvals | IEC60945 |
| Inputs | 2xNMEA0183(IEC 61162-1), 1xexternal light sensor |
| Outputs | 2xNMEA0183(IEC 61162-1), 1xrelay (up/down) |
| Mounting format | 96 mm format (cutout 63 mm x 84 mm)
Screw holes, 70 mm x 82 mm, d4 mm |
| Weight | 280 g |
| Optional IR31 Sensor | External light sensor |
| Service | Available in most major harbours, world-wide through extensive dealer network |
Category:
Accessories-SkSub-Category:
